User manual NAD T175 HD

[. . . ] ® Owner's Manual AV Tuner Preamplifier T 175 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1. Readinstructions- All the safety and operating instructions should be read before the product is operated. Retaininstructions- The safety and operating instructions should be retained for future reference. HeedWarnings- All warnings on the product and in the operating instructions should be adhered to. [. . . ] SourceSetup: If Trigger Output is linked to `Source Setup, ' +12V DC is available at Trigger Out whenever the particularly assigned Source is selected. Please see also separate discussion about `Trigger Out' under the Source Setup (Normal) section. DELAY The availability of +12V DC at Trigger Out can be regulated. If it is desired that +12V DC is available without delay the moment Trigger Out is linked to its assigned setting, set Delay to 0s. Otherwise, one can select through a delay time of 1s to 15s. AUTOTRIGGERIN Auto Trigger IN allows external system controllers to toggle the associated section of the T 175 from `Standby' to `On' and vice versa. When the TRIGGER switch at the rear panel is set to AUTO, a +12V DC input at Trigger IN will power ON the section where Trigger IN is assigned, Main: From standby mode, the T 175 is powered ON when +12V DC is applied at Trigger IN. Zone2, Zone3, Zone4: Applicable Zone is turned ON whenever +12V DC is present at Trigger IN. All: Main, Zone 2, Zone 3 and Zone 4 as described above will all be activated given a +12V DC input at Trigger IN. WARNING IfAutoTriggerINatTriggerSetupmenuisassignedto`Main'or`All'and theTRIGGERswitchissetto`AUTO'mode, theStandbybuttoninthe frontpanelaswellasthecorrespondingON/OFFfunctionkeysinthe HTRC1remotecontrolwillbedisabledeffectivelyhandingthisfunction toanexternalcontroller. SwitchTRIGGERto`OFF'tomaintainnormal powerON/OFFfunctionprocedures. +12 V TRIGGER OUT, TRIGGER IN, TRIGGER AUTO/OFF' of REAR PANEL discussion as well as the `Trigger Out' discussion under `Source Setup (Normal View). ' LISTENINGMODES The audio format as detected by the selected Source can be automatically configured and processed through the following options: DOLBY Dolby Digital is the multi-channel digital signal format developed in the Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo were recorded with up to 5. 1 channels of digital signals, reproducing a much better sound quality, with dynamic and spatial sound sensations that are much better than in the previous Dolby Surround. 7 SVENSKA A Dolby Digital audio input can be configured relative to its format as follows Stereo: If the detected audio is of Dolby stereo format, you can default it to one of the following settings ­ Pro Logic, PLIIx Movie, PLIIx Music or None. Surround: If the detected audio is of Dolby Surround format, you can default it to one of the following settings ­Surround EX, PLIIx Movie, and PLIIx Music, Stereo Downmix or None. None: If `None' is selected, the Dolby Digital signal will be defaulted to the `Stereo' or `Surround' settings set forth at the `PCM' option. See discussion below about `PCM'. NEDERLANDS DEUTSCH ITALIANO ESPAÑOL The T 175 features three configurable +12V DC Trigger Output that can be used to activate a component or system it is fed into. A Trigger Input is also available to turn on the applicable link it is associated to. Use a combination of or ENTER and keys to navigate through the Trigger Setup menu parameters. The T 175 has various listening mode options and is mostly configurable. These are provided to reproduce a variety of sound effects depending upon the content of the source to be played. Use a combination of or ENTER and keys to configure the following settings. FRANÇAIS ENGLISH OPERATION USINGTHET175­SETUPMENU ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA DOLBYDIGITALPLUS Dolby Digital Plus is the next-generation audio technology for all highdefinition programming and media. It combines the efficiency to meet future broadcast demands with the power and flexibility to realize the full audio potential expected in the upcoming high-definition era. Dolby Digital Plus delivers multi-channel audio programs of up to 7. 1 channels and supports multiple programs in a single encoded bitstream with the maximum bit rate potential of up to 6 Mbps and the maximum bit rate performance of up to 3 Mbps on HD DVD and 1. 7 Mbps on Blu-ray Disc. It outputs Dolby Digital bitstreams for playback on existing Dolby Digital systems. [. . . ] · Check source component setup. T175doesnotrespondtoHTRC1remote. · Check batteries. · Check IR windows and ensure clear line-of-sight from remote to T 175. · Power-down the T 175 via the rear panel Power switch and unplug it from the AC outlet. · Wait five minutes, re-connect and power up. [. . . ]