User manual NADY CX-23SW

[. . . ] Please read this manual carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO as your choice in crossovers. FEATURES Crossovers provide precise frequency dividing for multiamplified speaker applications, and are valuable tools in many professional live sound uses. The CX-23SW offers 3-way active LOW/MID/HIGH outputs for each stereo channel and a mono subwoofer output. It is simple to set up and operate and is the perfect choice for basic multiamp, multi-speaker stereo installations. [. . . ] Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure's openings. The product should be serviced by qualified service personnel if: A. The power supply cord or the plug has been damaged. Objects have fallen into, or liquid has been spilled onto the product. The product does not appear to operate normally or exhibits a marked change in performance. The product has been dropped, or the enclosure damaged. Do not attempt to service the product beyond what is described in the user maintenance instructions. All other servicing should be referred to qualified service personnel. 3 CONTROLS AND CONNECTIONS 5 4 3 2 8 7 5 4 3 2 9 6 6 1 FRONT PANEL 1. POWER SWITCH: To turn the unit ON or OFF, press the upper or lower portion of this button. The internal power LED illuminates when the unit is turned "ON". (Caution: Always turn the Crossover ON before the amplifier, and turn it OFF after the amplifier or transients harmful to the speakers may result. ) 2. L/M/H OUTPUT LEVEL CONTROLS: These are used to adjust the output level of each way: LOW, MID and HIGH . LOW CUT BUTTONS FOR LOW WAY: These insert low cut filters in the LOW way of each stereo channel with a 12dB/Octave, 30 Hz HPF to minimize problems from subsonic frequencies in the signal, to suppress hum, and to prevent low frequency speaker resonance. 3. PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT Caution : To prevent malfunctioning and/or possible equipment damage: Before plugging the unit into the power source: (1) the voltage selector switch should be set for the correct voltage for your area (115V or 230V) and (2) all equipment connected to the crossover outputs should be turned off or all the inputs turned down. 4. MH CROSSOVER FREQUENCY CONTROLS: These select the crossover frequencies of the MID and HIGH ways. They're a low cut for the HIGH and a high cut for the MID. You can select the frequencies between 480 Hz to 7 kHz. LM CROSSOVER FREQUENCY CONTROLS: These select the crossover frequencies of the LOW and MID ways. They're a low cut for the MID and a high cut for the LOW. You can select the frequency between 70 Hz to 1 kHz. PHASE BUTTONS: These allow switching the polarity to invert the signal phase on the MID and HIGH ways. This is done after the output levels are set to correct audible phase problems. [. . . ] AC VOLTAGE SELECTOR SWITCH: Before plugging in the power cord, check to see that the unit is set for the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz). FUSE COMPARTMENT : Replace with only the same type fuse (0. 5A/250V). If it blows continuously, do not use the unit until it has been serviced by qualified personnel. SPECIFICATIONS Crossover Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo 3 ways + Subwoofer Crossover Frequencies Subwoofer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 - 250Hz LM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 ­ 1000Hz MH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 ­ 7000Hz Filter Type (Slope) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2nd order, 12dB/Octave Inputs Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced Combo 1/4" TRS & XLR Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100K Outputs Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Balanced XLR Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Low Cut Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Hz/ - 3dB, 12dB/Octave Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Hz - 25KHz +/-1dB Total Harmonic Distortion (THD) + Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 0. 05 % S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 80 dB Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5 A/ 250V, 5x20mm glass type Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19'' x 1. 73'' x 5. 9'' (483 X 44 X 150mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. 4 lbs. (2. 2 Kg) Specifications and design subject to change without prior notice for improvement purposes 5 TYPICAL SET-UP SUBWOOFER RIGHT LEFT RIGHT LEFT RIGHT LEFT HIGH AMP VOL VOL VOL MID AMP VOL VOL LOW AMP VOL SUBWOOFER AMP VOL 115V/60Hz 230V/50Hz AC IN FUSE 0. 5A/250V XLR BALANCE PIN 1 GND PIN 2 HI PIN 3 LO CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: SHOCK HAZARD - DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR. NADY SYSTEMS, Inc. Emeryville, CA, USA HIGH MID R CHANNEL LOW OUTPUTS IN P U T S U B WO O FE R H IG H MID L CHANNEL LO W OUTPUTS IN P U T Made in China SOURCE LINE-IN 6 SERVICE FOR YOUR NADY AUDIO PRODUCT (U. S. ) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nadywireless. com. [. . . ]