User manual NADY FWA-15

[. . . ] We recommend that you read this instruction sheet carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO and the FWA-15 as your choice in floor wedge speakers. FEATURES AND SPECIFICATIONS · Active 160W RMS floor wedge speaker with 15" woofer, 5" x 15" high compression piezo horn · 3 Channel Inputs: Balanced XLR and 1/4" Mic level, Balanced XLR and 1/4" Line level, Balanced XLR and dual RCA Line level; each with Input Gain control · Line level balanced XLR and unbalanced 1/4" Outputs · Master Volume, Treble and Bass controls; ON/OFF rocker switch; Power and Clipping LEDs · Durable black carpet cover, heavy duty plastic protective corners and integrated recessed carrying handles for easy handling · Frequency Response: 60Hz ­ 18KHz · S/N ratio: 87dB · T. H. D. < 0. 5% · Dimensions: (WHD): 18. 1"x 30"x 21. 5" (46 x 76. 5 x 54. 6 cm) · Weight: 53. 4 lbs (24. 2 kg) WARNINGS IMPORTANT SAFETY INSTRUCTIONS · The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product. [. . . ] · This product may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. · To avoid damage to the drivers, never overload the speaker. · To avoid the risk of fire, do not ever expose the speaker to a source of naked flames. Also, it should be located away from heat sources such as radiators, heat vents, or other devices (including amplifiers) that produce heat. · The product should be positioned so that proper ventilation is maintained. · This speaker is designed for indoor use only. Do not expose to weather or high humidity, rain, etc. · Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure's openings. Do not place containers of liquids on the speaker. OPERATION (1) POWER ON/OFF SWITCH TECHNICAL DATA (2) AC POWER CORD IEC CONNECTOR w/ internal fuse holder Connects to the AC power cable. Fuse: 115VAC ~ 5A 250V 20mm glass tube 230VAC ~ 3A 250V 20mm glass tube (3) AC SELECTOR SWITCH Before plugging in the power cord, check to see that this switch is set to the proper voltage for your area: ~115V (60Hz) or ~230V (50Hz). Note: Units damaged due to powering up with the wrong voltage are not covered under warranty. (4) POWER LED (5) CLIPPING LED This LED turns red when the output signal is clipping. [. . . ] (13) MASTER VOLUME CONTROL This controls the volume sent to the speaker. Make sure to turn this (14) TREBLE EQ Adjusts treble frequencies +/-12dB. (15) BASS EQ Adjusts bass frequencies +/-12dB. (7) (6) (9) (8) (10) (11) (13) (12) (14) (15) (5) (4) (2) FREQUENCY RESPONSE SPL 110 dB 100 dB 90 dB 80 dB 70 dB 60 dB 50 dB 40 dB 30 dB 20 Frequency 100 500 1k Hz 5k 10k 20k (1) (3) SERVICE FOR YOUR NADY AUDIO PRODUCT (U. S. ) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail at service@nady. com. [. . . ]