User manual NADY PCS-8

[. . . ] We recommend that you read this instruction sheet carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO and the PCS-8 as your choice in powered speakers. FEATURES AND SPECIFICATIONS · Treble, Bass, and Level controls · XLR balanced and 1/4" unbalanced inputs and outputs · Mic / Line level attenuation switch · 80 Hz to 20 KHz frequency response · Lightweight: 19. 0 lbs (8. 6 Kg) · Compact sizing for ease of portability: 11" x 9. 8"x 16. 8" (27. 9 x 24. 9 x 42. 7 cm) · Full range, 2-way 35W RMS powered speaker with 8" woofer, 5. 5" x 8" compression horn · Durable yet lightweight molded polypropylene enclosures, designed to deflect bumps and scrapes · Versatile design perfect for myriad small room PA (as FOH and monitor speakers) and project recording applications (as studio monitors). Can be mounted upright on a speaker stand (1"dia. ) or wall mounted with mounting bracket included. [. . . ] All servicing should be referred to qualified service personnel. When using this speaker, basic precautions should always be taken, including the following: · Read all instructions before using the product. · This product may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. · To avoid damage to the drivers, never overload the speaker. · To avoid the risk of fire, do not ever expose the speaker to a source of naked flames. Also, it should be located away from heat sources such as radiators, heat vents, or other devices (including amplifiers) that produce heat. · The product should be positioned so that proper ventilation is maintained. · This speaker is designed for indoor use only. Do not expose to weather or high humidity, rain, etc. · Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure's openings. Do not place containers of liquids on the speaker. OPERATION TECHNICAL DATA (10) (11) (1) POWER ON/OFF SWITCH w/ internal LED (2) AC POWER CORD IEC CONNECTOR w/ internal fuse holder Connects to the AC power cable. Fuse: 115VAC ~ 2A 250V 20mm glass tube 230VAC ~ 1A 250V 20mm glass tube (3) AC SELECTOR SWITCH Before plugging in the power cord, check to see that this switch is set to the proper (9) voltage for your area: ~115V (60Hz) or ~230V (50Hz). Note: Units damaged due to powering up with the wrong voltage are not covered (8) under warranty. (4) INPUTS XLR balanced and 1/4" unbalanced inputs. (5) OUTPUTS XLR balanced and 1/4" unbalanced outputs. [. . . ] Note: Speakers damaged due to clipping are not covered under warranty. (9) LEVEL CONTROL This controls the master volume. (10) TREBLE EQ (11) BASS EQ (4) (5) FREQUENCY RESPONSE 100 90 80 SPL (dB) 70 60 50 40 30 20 20 40 70 100 200 500 1k Hz 5k 10k 20k (2) (1) (3) WALL MOUNTING Frequency (Hz) Front View Back View Bottom View 16. 8" 9. 8" 1" dia. 11" SERVICE FOR YOUR NADY AUDIO PRODUCT (U. S. ) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail at service@nady. com. [. . . ]