User manual NADY PPM-3

[. . . ] USER GUIDE ProPowerTM Microphone Kit PPM-3 Congratulations on purchasing the Nady PPM-3 microphone kit!The versatile, professional quality ProPowerTM Series microphone is designed to provide top performance in all live stage and public address applications. Transparent sound also makes the PPM-3 a valuable recording tool. [. . . ] Using either an XLR to XLR or XLR to 1/4" phone plug low impedance cable, connect the female XLR end to the mic and the other end (male XLR or 1/4" phone plug, as appropriate) to your equipment. Depending on the application, the mic can either be handheld or mounted on a microphone stand with a standard mic clip. Be aware of the proximity effect (an increase in bass response) when the mic is placed close to the mouth or instrument. Experimenting with the position of the mic with respect to the audio source will ensure the optimum results you are seeking in any given application. Also, never place your hands over the ballscreen of the mic during use, as this can degrade the performance. If the microphone is placed too near an audio speaker, an unpleasant howling effect (acoustic feedback) may occur. Although all microphones are prone to feedback to some extent, those with a unidirectional polar pattern (such as the ProPowerTM Series) are specially designed to accept only signals from the audio source directly in front of the mic cartridge. Thus, the cardioid pattern ensures that it will deliver only the desired audio in front of the mic, rejecting the unwanted audio from the rear, even in noisy ambient conditions with high sound pressure levels from the PA. This means that feedback will be greatly minimized with the ProPowerTM Series in all live performance miking applications. Some useful ways in which to totally eliminate annoying feedback include: experimenting with mic positions with respect to the speakers, decreasing speaker volume (whenever possible), and adjusting the equalization of the mic audio with the mixer. PRECAUTIONS AND CARE OF YOUR ProPowerTM SERIES MICROPHONE · The microphone should never be dropped or subjected to extreme shock. Store only in a padded case to protect it during transport. · Keep the microphone away from extremely high temperatures (above 140°F or 60°C )and humidity. Avoid leaving the microphone in direct sunlight for long periods of time. [. . . ] SERVICE FOR YOUR NADY AUDIO PRODUCT (U. S. ) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail to service@nady. com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. SPECIFICATIONS Element: Moving coil dynamic Polar Pattern: Uni-directional Frequency Response: 70Hz~15KHz Sensitivity: -54dB±3dB (0dB= 1V/Pa at 1KHz) Output Impedance: 500 ±30 % Case Dimensions: 11. 1" x 8. 3" x 2. 9" (28. 2 x 21 x 7. 4 cm) Mic Dimensions: 7" x 1. 8" (17. 8 x 4. 6 cm) Net Weight: 10. 1 oz (286 g) Accessory: Microphone clips Specifications and design subject to change for improvement purposes without prior notice. FREQUENCY RESPONSE & POLAR PATTERN OPTIONAL ACCESSORIES · · · · · · · · · · XC-6 -- 6' XLR TO XLR mic cable XC-10 -- 10' XLR TO XLR mic cable XC-15 -- 15' XLR TO XLR mic cable XC-20 -- 20' XLR TO XLR mic cable XC-30 -- 30' XLR TO XLR mic cable XCC-25 -- 25' XLR TO XLR colored mic cable MST-3R -- Straight mic stand w/round base MST-5B -- Boom mic stand w/tripod base CWS-1 -- Color mic windscreen SMCC-2 -- Aluminum fight case NADY SYSTEMS, Inc. 6701 Shellmound Street Emeryville, California 94608 Phone: 510. 652. 2411 · Fax: 510. 652. 5075 www. nady. com [. . . ]