User manual NADY TTV-2

[. . . ] 10K min - 70K max INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" jack (unbalanced) INPUT LEVEL (max, nominal) . . . . . . -30dBv / >+20dBv INPUT IMPEDANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. TTV-2 Dual Tube Vibrato and NADY SYSTEMS, INC. · 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608 Tel: 510. 652. 2411 · Fax: 510. 652. 5075 · www. nady. com Tremolo Effects Pedal Introduction Congratulations!You have just purchased one of the finest professional effects pedals on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find your new NADY AUDIO TTV-2 dual tremolo/vibrato pedal has superior performance and greater flexibility than any other such unit in its price range. Read these instructions carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO as your choice for a Tremolo/Vibrato pedal (1) (2) (3) (4) (10) (9) Features · Dual, all tube signal path design uses two premium 12AX7A vacuum tubes for the warmest, richest, and most natural sounding tremolo and vibrato sounds available · Rate/Intensity controls offer the widest range possible of tremolo/vibrato effects (7) · Choice of three types of note bending vibratos which mimic Leslie, Wurlitzer, Hammond and other classic organ vibratos · Output control offers considerable boost and a powerful tone · Compact enough for a paddle board · Rugged 14 gauge steel housing and heavy-duty bypass switch for years of trouble-free performance (11) (8) Controls and Connections (1) OUTPUT The Output control adjusts to overall signal output output level (2) RATE The Rate knob adjusts the speed of modulation for the Vibrato or Tremolo. As the RATE knob is turned from the counter-clockwise (minimum) position to the clockwise (maximum) position, the rate of modulation will increase. (3) RATE INDICATOR The Rate LED blinks at the same rate as the effect is modulating, as selected by the Rate knob. (4) INTENSITY The Intensity Knob adjusts the amount of Vibrato or Tremolo that will effect your signal. As the INTENSITY knob is turned from the counterclockwise (minimum) position to the clockwise (maximum) position, the amount of the effect will increase. (5) ON/OFF SWITCH This switch is between the effected signal (ON) and the uneffected (bypassed) signal (OFF). When in Bypass mode the input is connected directly to the output. (6) ON/OFF INDICATOR When the LED lights GREEN, the signal passes through the effects modulation selected (Tremolo or Vibrato ON). When the LED is RED, the single is bypassed (OFF). (7) VIBRATO/TREMOLO SWITCH This selects the type of effect desired. [. . . ] Remove all nuts and washers for the footswitch, the potentiometers and the IN/OUT jacks. Remove all screws -- 8 screws from the bottom panel, 4 screws from each side panel. Hold the tube socket to loose tube, one at a time. [. . . ]