User manual NADY VHM-7

[. . . ] VHM-7 Vocal & Harmonica Microphone USER GUIDE Congratulations on purchasing the Nady VHM-7 Vocal & Harmonica Microphone. This user guide covers the operation of the VHM-7 microphone and the available optional accessories. [. . . ] · Unique, chromed aerospace casing with stylish retro look and distinctive proprietary fluted design for versatility in shaping wah-wah sounds and altering tone while virtually eliminating feedback. It's bullet-proof tough and ultra comfortable in the hand. · Engraved model number and supplied special chromed mic clip complements the appearance of what is already one of the most attractive mics on the market. This mic sounds and looks great -- a perfect way to augment your overall performance and presentation. USING YOUR VHM-7 The VHM-7 can be used with any standard mixer, powered mixer/amplifier, or mic preamp. Using either an XLR - XLR or XLR - 1/4" phone plug low impedance cable, connect the female XLR end to the VHM-7 and the other end (male XLR or 1/4"phone plug, as appropriate) to your equipment. The VHM-7 can be mounted on a microphone stand with the integral mic holder mount supplied. Depending on the threading of the mic stand you are using, you may need to remove the threaded adapter from the mic holder. Be aware of the proximity effect (an increase in bass response) when the mic is placed close to the instrument. Experimenting with the position of the mic with respect to the audio source will ensure the optimum results you are seeking in any given application. If the microphone is placed too near a speaker during live stage use, an unpleasant howling effect (acoustic feedback) may occur. [. . . ] (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. Date of purchase _____________________________________________________________________________________________ Dealer's Name ______________________________________________________________________________________________ Street ______________________________________________________________________________________________________ City ____________________________________ State _____________________ Zip _____________________________________ SPECIFICATIONS TYPE: Dynamic POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 40 to 16KHz (±3dB) SENSITIVITY: -58dB (0dB=1V/pa) IMPEDANCE: 200 Ohms MAX. SPL (1% THD @ 1000Hz): 144dB SIZE (H x L x D): 3. 5" x 3" x 2. 25" (89 x 76 x 57 mm) WEIGHT: 9. 7 oz (276 g) Specifications and design subject to change for improvement purposes without prior notice. 08/09/05 [. . . ]