User manual NAIM ARO

[. . . ] 9 UnitiQute Specifications 21 7 7. 1 7. 2 7. 3 8 8. 1 8. 2 8. 3 UnitiQute UPnPTM Audio Interface UPnPTM Servers Audio File Compatibility Scanning Servers and Playing Files UnitiQute USB/iPod Interface USB Media and File Compatibility iPod Compatibility and Charging Browsing and Playing USB Files 19 19 19 19 20 20 20 20 6. 1 6. 2 6. 3 6. 4 6. 5 6. 6 UnitiQute Multi-mode Radio Tuner FM Tuner ­ Seeking Stations DAB Tuner ­ Seeking Stations iRadio Tuner ­ Seeking Stations Adding iRadio Stations Storing Radio Presets Using Radio Presets 17 17 17 17 18 18 18 Page 5 5. 1 5. 2 5. 3 5. 4 5. 5 UnitiQute Integrated Amplifier Selecting Inputs Volume Control Amplifier Display Signal Outputs Amplifier Fault Warnings 16 16 16 16 16 16 "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod and iPhone are trademarks of Apple Inc. , registered in the U. S. Windows MediaTM is a trademark of Microsoft Corporation. [. . . ] If Yes is specified UnitiQute will automatically display the last used folder on the USB device. If No is specified the top level folder of the device will be displayed. iPod battery charging takes place always when the iPod is connected or never takes place. Enabled: Yes Name: USB/iPod Input Trim: 0 4Folder History: No Options Large / Small / None Yes / No 0 to 100 (adjust using handset 6or 5 keys) -10 to + 10 (adjust using handset 6or 5 keys) The speaker type options specify high-pass filtering settings. Select the Large option when the UnitiQute preamplifier output is connected to an external power amplifier or to a subwoofer used to augment the low frequency performance of large (full bandwidth) speakers. Select Small only when the UnitiQute preamplifier output is connected to a subwoofer used to provide the low 11 Note: The non-charging option is provided because there is a small reduction in iPod sound quality when simultaneously charging and playing. This means however that an iPod can potentially run out of power while playing via the UnitiQute. Un itiQ u t e Setu p frequency component of a speaker system incorporating small (restricted bandwidth) satellite speakers. When Small is specified, a 100Hz high-pass filter is applied to the UnitiQute speaker output signal. Select None when no speakers are connected directly to the UnitiQute Engaging the Loudness option applies low frequency boost to the speaker and preamplifier outputs that decreases as the volume setting is increased. Through compensating for the ear's reduced low frequency sensitivity at low volume levels, the Loudness function can make low volume listening more satisfying. Note: The loudness contour operates at volume settings between 0 and 55. Volume and Balance parameters specify maximum allowed volume, and the channel balance respectively. If the network is successfully joined UnitiQute will display a confirmation screen. Now enter your wireless passphrase or access key. Press OK to continue 4. 6 The Network Settings Menu The Network Settings menu enables UnitiQute network parameters to be customised to suit the router and network. The options are tabulated and described in the following sections: Parameter Name: Wireless: Status: DHCP: Network Settings 1/4 4Name: Uniti-0131 Wireless: Not Used Status: Not Connected DHCP Yes Options User definable (text entry) Default: Uniti-xxxx Not Used / Wireless Network Names Connected / No Signal / Login Failure / Busy / Etc. Yes / No The Name parameter enables the UnitiQute's default network name to be changed. The Wireless parameter enables a wireless network to be chosen and joined. See Section 4. 6. 1 below for detailed wireless set up notes. Network Status displays the current network connection status. The DHCP parameter enables the UnitiQute network settings to be modified. In most cases, specifying Yes and leaving UnitiQute set to DHCP, will be the appropriate 12 flatfish abc Press OK to confirm flatfish| Connected Press OK To Finish Un itiQ u t e Setu p If an incorrect passphrase or access key is entered UnitiQute will display an alert message. Can't Login Press OK To Re-Try settings. Consult your network router's user documentation for help with specifying fixed IP address settings. Note: As a security measure, a router may also require the UnitiQute's MAC address to be entered before allowing it to join the wireless network. This type of security feature is known as `MAC address filtering'. [. . . ] Tracks can then be selected for playback by using the up (5), down (6) and ok/list keys. In long lists the handset numeric/text keys can be used to jump through the list alphabetically. Once playback is underway the UnitiQute display will exit from list mode and revert to normal mode where the handset transport keys ( ) can be used to control playback. To re-enter list mode for further list browsing and selecting press the handset ok/list key. [. . . ]