User manual NAIM CD5X

[. . . ] WORLD CLASS HI FI OWNERS MANUAL CD Players: CDS3, CDX2, CD5x, CD5i IMPORTANT In order to comply with current European safety regulations it is essential that the Naim loudspeaker connectors supplied with amplifiers and loudspeakers are used. Do not under any circumstances allow anyone to modify your Naim equipment without first checking with the factory, your dealer, or your distributor. Unauthorised modifications will invalidate your guarantee. For your own safety do not under any circumstances open Naim equipment without first disconnecting it from the mains. [. . . ] The display will read HDCD for a few seconds after play is pressed. 10. 3 Front Panel Control Modes The CD5x has an optional front panel control mode. This multifunction mode provides an alternative front panel interface in which fast forward, fast reverse and pause are selected by pressing and holding next, previous and play respectively. To select multi function mode press and hold next while the player is switched on. To select the standard control mode press and hold previous while the player is switched on. 10. 4 Player Display and Indicators The alphanumeric display indicates track and index numbers, time in minutes and seconds, or various system messages (Error, Track programming info, etc). The full stop on the right of the display window illuminates when the player receives a signal from the remote handset. If a track play list is programmed the time displayed reflects the duration of the program. On the far left of the display are four indicators. HDCD: time: repeat: prog: Illuminates to show that an HDCD encoded disc is playing. Illuminates to indicate display of total disc time or elapsed time of the track being played. Illuminates to show that repeat has been selected from the remote handset. Illuminates to indicate that a program has been stored. Further information on play list programming can be found in Sections 16, 17 and 18. 10. 2 Player Controls previous: With a disc loaded but not playing the previous button searches the disc contents backwards, either one track at a time, or sequentially if the button is held. While a disc is in play, the previous button searches the table of contents backwards. Play resumes with the selected track when the button is released. The next button operates in the same way as the previous button, but moving forwards through the disc instead of backwards. Stops play and resets the player to its start condition. Pressing and holding stop will clear any programmed play order, or, if no play order is programmed, will return the player display to its default state (track indication). Plays a disc from track one unless another track has been selected. Play operated while a track is playing will re-start the track. next: stop: Pause indication is provided by the play indicator flashing. Note: If the CD5x is paused for more than 10 minutes it will enter a "static pause" mode in which the transport laser deactivates and the disc stops spinning - so reducing wear on the transport. The player can be left in static pause indefinitely. Both the play and stop indicators will illuminate when the player is in static pause mode. play: All CD control functions are duplicated on the Flash, NARCOM 3 and CD5i remote handsets. [. . . ] disp: prog: Selects the component front panel display mode. Provides access to component programming functions. cd: Switches the action of the Soft Keys to that Global keys appropriate for a CD (Preamplifier) player. pre: Switches the action of the Soft Keys to that appropriate for an integrated or preamplifier. Global keys (CD Player) 19. 5 CD Track Programming To program a play order select a track number from the numeric keys followed by the prog key until the desired selection is complete. During selection, the track number indicated in the player display will be followed by either P or -- or no display. [. . . ]