User manual NAIM NA IBL

[. . . ] UPnPTM is a trademark of the UPnPTM Forum. Page 5 5. 1 5. 2 5. 3 5. 4 5. 5 SuperUniti Integrated Amplifier Selecting Inputs Volume Control Amplifier Display Signal Outputs Amplifier Fault Warnings SuperUniti Multi-mode Radio Tuner FM Tuner ­ Seeking Stations DAB Tuner ­ Seeking Stations iRadio Tuner ­ Seeking Stations Adding iRadio Stations Storing Radio Presets Using Radio Presets SuperUniti UPnPTM Audio Interface UPnPTM Servers Audio File Compatibility Scanning Servers and Playing Files SuperUniti USB/iPod Interface USB Media and File Compatibility iPod Compatibility and Charging Browsing and Playing USB Files SuperUniti Specifications 17 17 17 17 17 17 18 18 18 18 19 19 19 20 20 20 20 21 21 21 21 22 6. 1 6. 2 6. 3 6. 4 6. 5 6. 6 7 7. 1 7. 2 7. 3 8. 1 8. 2 8. 3 9 Note: This manual is issue No. 1 and describes the operation of SuperUniti units running software release version 3. 6. xx Su p e rU niti Intro duc tion 1 Su per Un it i Introd ucti o n SuperUniti is a highly capable product that will repay time and effort spent on installation and setup. We strongly recommend that you read this manual. SuperUniti incorporates four separate elements. [. . . ] 4 Th e S p ea k er s M en u The Speakers setup menu enables the SuperUniti internal amplifier and its preamplifier and subwoofer outputs to be configured: Parameter Amp Used: Max. Volume: Balance: Speakers 1/3 4Amp Used: Internal Only Max. Volume: 100 Balance: 0 Note: The non-charging option is provided because there is a small reduction in iPod sound quality when simultaneously charging and playing. This means however that an iPod can potentially run out of power while playing via the SuperUniti. Options Internal Only / External / All Outputs 0 to 100 (adjust using handset 6or 5 keys) -10 to + 10 (adjust using handset 6or 5 keys) The Amp Used options specify use of the SuperUniti internal power amplifier and enable or disable the preamplifier and subwoofer outputs. Select Internal Only if no external amplifier or subwoofer is to be used. The preamplifier and subwoofer outputs are disabled when Internal Only is selected. 11 Su p e rU niti Setup Select External if an external power amplifier is to be used in place of the SuperUniti internal power amplifier. The preamplifier and subwoofer outputs are enabled when External is selected. Select All Outputs if an external power amplifier or subwoofer is to be used in conjunction with the SuperUniti internal power amplifier. Volume and Balance parameters specify maximum allowed volume, and the channel balance respectively. Note: If SuperUniti is connected to the network both wirelessly and via Ethernet (wired), the Ethernet connection will take priority. 4. 6. 1 Wireless Network Connection Set Up Select Network <Don't Use Wireless> LingNet 4GreenNet TomNet 3/6 4. 5 The Headpho ne s M e nu The Headphones setup menu enables the Max. See Section 4. 6. 1 below for detailed wireless set up notes. Network Status displays the current network connection status. The DHCP parameter enables the SuperUniti network settings to be modified. In most cases, specifying Yes and leaving SuperUniti set to DHCP, will be the appropriate option. See Section 4. 6. 2 below for notes on non-DHCP network connection. Note: Devices installed on a network have an IP address through which they are identified by all the other items on the network. DHCP is a set of rules that enable the automatic allocation of addresses as items are connected (or switched on while connected) to the network. SuperUniti is set up by default to use DHCP. flatfish abc Press OK to confirm flatfish| Connected Press OK To Finish Can't Login Press OK To Re-Try Note: As a security measure, a router may also require the SuperUniti's MAC address to be entered before allowing it to join the wireless network. This type of security feature 12 Su p e rU niti Setup is known as `MAC address filtering'. The SuperUniti MAC address is shown in the `Factory settings > System Status' page. Note: The wireless passphrase/access key is created when the wireless router is first set up and could be a word or a series of numbers and letters. [. . . ] 2 A udio File C o mpatibility The audio files stored on the UPnPTM servers attached to the network may be in MP3, M4A, Apple Lossless, AAC, LPCM16/24, FLAC, WMA, WAV, AIFF or Ogg Vorbis formats. Files must be free of any digital rights management playback restrictions such as the Apple iTunes FairPlay system. 7. 3 S canning Se rv e rs and P laying Fi l es When the SuperUniti UPnPTM input UPnP 1/3 is selected a list of available 4Allegro Media Server UPnPTM servers on the network NAS Disk UnitiServe will be displayed. The display will automatically enter list mode so the handset up (5), down (6 )and ok/list keys can be used to browse and select the desired server. [. . . ]