User manual NAIM1 CDS3 PLAYER MANUAL

[. . . ] owners manuaL CD PLaYers enGLIsH DeuTsCH FranÇaIs ITaLIan0 Cont ent s Page section saFeTY InsTruCTIons In order to comply with current european safety regulations it is essential that the naim loudspeaker connectors supplied with amplifiers and loudspeakers are used. Do not under any circumstances allow anyone to modify your naim equipment without first checking with the factory, your retailer, or your distributor. unauthorised modifications will invalidate your guarantee. equipment must not be exposed to dripping or splashing and no objects filled with liquid, such as vases, should be placed on the equipment. [. . . ] Take care not to damage the rubber pressure pads. Brush them lightly with your finger or a soft cloth. Do not, under any circumstances, use any solvents or fluids for the cleaning process. e8 CDX2 1 0 CDX2 In t rod ucti o n a nd Instal l a ti on The CDX2 CD Player can be operated either from its internal power supply or, for improved performance, from an external naim CD 555Ps or XPs Power supply. Connection of the XPs Power supply is illustrated in Diagram 11. 2. CD player control and operation is described in sections 19, 20 and 21. The CDX2 should be installed on a dedicated equipment stand intended for the purpose. To improve sound quality the player has hard metallic feet which may blemish any delicate surface on which it is placed. Do not stand the player directly on top of another item of naim audio equipment. Care should be taken to ensure that the player is level. The CDX2 is fitted with both analogue and S/PDIF digital output options selectable using a rear panel switch. a transit screw on the underside of the CDX2 should be removed before use and must be replaced if the unit is to be moved or re-packed and shipped. The transit screw must not be used in any other naim product. Do not invert the player once the transit screw is removed. The player (and external power supply if used) should be installed in its final location before connecting cables or switching on. ensure that power amplifiers are switched off and the preamplifier volume is turned down before the player (or external power supply) is switched on. The player power button is located on the rear panel. Power supply power buttons are located on their front panels. The player and power supply are heavy and care should be taken when lifting or moving them. make sure that the surface on which they are to be placed can support their weight. 1 1 CDX2 Connecti o ns 11. 1 rear P an e l Remote input RS232 interface DIN output Power switch Mains input and fuse S/PDIF digital out Digital/analogue output switch Upgrade power supply input (link plug fitted) RCA phono output left RCA phono output right CDX2 DIn output ch1 ch2 -ve nc nc note: RCA phono and DIN output sockets should not be connected simultaneously. note: The power supply link plug should be fitted unless an external upgrade power supply is in use. note: The Remote Input is intended to accept external control signals for multi-room applications. Contact your dealer or Naim Audio directly for further information. [. . . ] CD player Global Keys operate as follows: prev next stop play fwd rev rpt pause Selects the previous track or index point. Pauses the cd. The CD player can be programmed with a random play order (from stop with no play order already in place) by pressing prog followed by 1. Similarly, to program a reverse play order, press prog followed by 2. Play orders can be reviewed by pressing prog while the player is either stopped or playing. [. . . ]