User manual NAPCO CICP1800 DATASHEET

[. . . ] Continental Instruments supports RS232, RS422 and RS485 communication formats for optimal system configuration. In addition to memory and power expansion capabilities, the Superterm will accept up to 3 input/output expansion boards. The Superterm can be ordered with the expansion boards preinstalled at the factory. [. . . ] Once programmed, the controller does not require continuous server communications, as it automatically stores system transactions in its internal memory. The Superterm's memory is field expandable, allowing for greater cardholder populations and/ or a larger transaction buffer. The controller's Flash EPROM firmware is easily upgraded when additional features or system enhancements are required. Continental's controllers feature extensive multi-stage lightning/transient protection on-board for maximum reliability even in harsh environments. The Superterm accepts industry standard Wiegand output devices and supports virtually all card/reader technologies. Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite, Keypad and Smart Readers are easily connected and controlled. The Superterm can store multiple card (bit) formats in its internal memory, making it a cost-effective retrofit panel. Supporting multiple bit formats allows existing card populations and readers to remain in place. **UL1950 replaced with EN60950 in Q2/2003 Continental Instruments, A Napco Security Group Company · 355 Bayview Ave. , Amityville, NY 11701 (631) 842-9400 · FAX (631) 842-9135 www. cicaccess. com GSA GS-07F-00039H A standard on-board power supply provides 800mA @5VDC or 500mA @12VDC for reader power. An additional 3A@12VDC is available with the optional expanded power supply. The Superterm can be ordered with a factory installed expanded power supply. The expanded power supply can also be ordered separately and field installed within the Superterm enclosure. The expanded power supply includes a 12AH standby battery, an upgrade to the standard 7AH battery. The standard 7AH and expanded 12AH batteries provide 4­6 hours standby. In addition to the rechargeable standby battery, each Superterm includes a lithium battery for up to one year of data protection. The Superterm-8 is UL Listed for UL294 (Access Control System Unit), UL1076 (Proprietary Burglar Alarm Unit) and UL1950** (Information Technology Equipment). Superterm-8 Components QTY. CICP1800 or Description Eight (8) reader controller with standard 20, 000 card capacity, 24 supervised alarm inputs, tamper alarm, and 17 relay outputs. Unit ships complete in a locked steel enclosure including a 7AH standby battery for memory and system operation. Same as above, with expanded power supply. [. . . ] Exit devices are typically mounted on the egress side of door. RS422 Repeat Mode Communications Network CICE1940PL-1 Polling Line Converter RS232 to RS422 Required if server is not located within 50 Sup p perterm 4000' max. Up to 63 controllers on a Repeat Mode Network. 4000' Sup p perterm Sm m marterm RS422 Max. [. . . ]