User manual NAPCO MAGNUM ALERT-850M

[. . . ] Read it carefully and keep it handy for future reference. Check the Glossary for an explanation of terms that may be unfamiliar to you. You'll probably find subjects mentioned in this booklet that do not apply to your system. Napco control panels have such a wide variety of features that few security systems, if any, will ever need them all. [. . . ] The Chime Mode will sound a tone at the keypad when the programmed zone is opened while disarmed. To deactivate the Chime Mode, execute Function 7 once again. Note: The Chime Mode is disabled while armed. INTERIOR BYPASS FIRE/TBL SYS TBL CHIME INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 8. YES NO. ) This optional feature simultaneously turns on all zones designated as Day Zones. To deactivate the Watch Mode, arm, then disarm. All Day Zones will revert to regular Burglary Zones. Note: The Watch Mode is disabled while armed. 17 MAGNUM ALERT-850M. pub page 17 Wednesday, August 18, 1999 14:03 KEYPAD FUNCTIONS 09 10 11 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 9. System troubles display and sound at the keypad. Correcting the trouble will clear most indications, however the following error codes will require manual reset: E11; E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes. ) 10. If accidentally enabled, press the C button to exit. INTERIOR BYPASS FIRE/TBL SYS TBL CHIME INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 11. Press the Jbutton to turn the displayed group on or off; press NEXT to proceed INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 19 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME to the next group, or PRIOR to scroll back to the previous group. Press the button when done. C 20 MAGNUM ALERT-850M. pub page 20 Wednesday, August 18, 1999 14:03 CENTRAL STATION MONITORING Your alarm specialist may have programmed your system to be monitored by a central station. The built-in digital communicator can transmit emergency signals and status reports to the central station 24 hours a day. Any or all of up to 96 different users can each be identified. If your system reports on arming (Closing Report), the central station will acknowledge arming. This will signal at the keypad as a "ringback" beep. Note: If the ringback signal is not heard, call for service. Communicator Features Abort Delay. Ask your installer which of your zones have abort delay, a delay that enables you to reset the system before it communicates to the central station. · Regular Burglary (Non-24-Hour) Zone reports are aborted by disarming within the delay period. · 24-Hour Zones and zones programmed to report restores must be restored first, then the panel armed and disarmed, all within the delay period. Your system can notify the central station every time it is disarmed or 21 MAGNUM ALERT-850M. pub page 21 Wednesday, August 18, 1999 14:03 ADVANCED FEATURES Security Bypass/Unbypass (Security Bypass programmed? [. . . ] THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF NAPCO. Any action for breach of warranty, including but not limited to any implied warranty of merchantability, must be brought within the six months following the end of the warranty period. IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. [. . . ]