User manual NAPCO STARLINK SL-1 FD-T

[. . . ] The surprisingly economical, supervised StarLink SL-1 Unit and service now makes backup alarm reporting, regardless of telephone line condition, an affordable option for every account. Ideal for use with any control panel brand, the StarLink SL-1 rugged metal unit is vandalproof and EMI/RFI-shielded, installs with as few as 4 wires, requires no programming and no expensive field-installation programming tool. [. . . ] And, the unit is simply registered in minutes via fax or online with easy web account management, available 24-7. Uniquely using the same high-speed, data-only service used by Black Berry and Palm VII devices, supervised StarLink uses DataTAC technology and a growing digital network of thousands of digital (not analog) towers/base stations. By not sharing a network with cell phones nor involving intermediary cell phone providers, like analog or control-channel units, StarLink alarm signals are always ensured the highest priority. In fact, most Contact ID format account alarms, for example, are received in 10 seconds, typical. · No expensive programmers to buy · StarLink automated operator system and internet web-site accessible 24-hours a day for signal verification & account setup · Intelli-Channel connects directly to bell output or siren driver output, providing burg/fire reporting on only one wire. · Each input channel is field-selectable for positive or negative trigger. · Signal strength annunciated by SL-1's LED, on a scale of 1 to 5 · Low Standby Current ( <20mA ) allows StarLink to be powered from existing alarm control panel/ battery · Ultra-compact, rugged aluminum enclosure accepts standard 1/2" EMT for wiring protection and standard 3/8" recessed magnetic contact for tamper-proof protection NAPCO StarLink Specifications Electrical Input Voltage: 12. 5VDC ± 15% Maximum Current: 2 AMPS (for less than 1 sec during transmit) Standby Current: 20mA Physical Dimensions: 192mm H x 78mm W x 34mm D w/o ant. (7. 559" H x 3. 07" W x 1. 336" D w/o ant. ) Mounting: #6 Screw Holes (4) Input Connector: 5mm Screw Terminal Output Connector: 2 mm (. 08") Wire Antenna, Mini UHF Option Environmental Temperature: -300C - 550 (-220F - 1310F) Humidity: 95% Non-Condensing Channels 3 Channels Selectable Voltage Positive Trigger (4. 5 to 14. 5) or Negative Trigger (750-millisecond integration delay) Channel 1 Selectable Option - Intelli-Channel for Bell Output, reads pulsed or steady and sends corresponding code (10-second integration delay) 333 Bayview Avenue, Amityville, New York 11701 1-800-645-9445 · Fax 631-789-9292 www. napcosecurity. com StarLink is a trademark of NAPCO. A478 1/04 NAPCO Product Availability Hotline NAPCO prides itself on the quality manufacturing of hundreds of products for you. [. . . ] If you ever experience difficulty or delay getting one, call our Stock-Out Hotline and we'll hook you up: 1-800-645-9330 Press 1 then 2. [. . . ]