User manual NAVIGON 3100

[. . . ] 11 Switching the Device On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Using the Touchscreen to Operate the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Carrying Out a Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. 5 Inserting a SD/MMC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For this reason; GPS positioning is not usually available inside buildings, tunnels, or underground car parks. In order to calculate your position, signals must be received from a minimum of 4 GPS satellites. Reception of GPS signals can be affected by adverse weather conditions or other obstructions (e. g. Other wireless devices in the vehicle may interfere with the reception of satellite signals or cause intermittent reception. 3 A cradle is needed when using the device in a vehicle. Mount the device in an appropriate place, so as not to obstruct the driver's view, or the deployment of airbags. The drivers field of vision must not be restricted. Do not place the device unsecured on the dashboard. Do not attach the cradle in front of airbag panels. Do not attach the cradle within the deployment zone of airbags. 4 2 Getting Started 2. 1 Getting to Know the Hardware Components NOTE: The colour of your device may not exactly match the colour of the device shown in this manual. Front Components Ref Component Touchscreen Charge Indicator Description Displays information. Tap the screen to select menu commands or enter information. Lights bright yellow when the battery is being charged. Lights green when the battery is fully charged. 5 Back Components Ref Component Loudspeaker Description Sound and speech output. Right-Side Components Ref Component SD/MMC Slot Description For the insertion of SD (Secure Digital) or MMC (MultiMediaCard) cards for accessing data such as map data. Socket for stereo headphones. Headphone socket 6 Top Components Ref Component Description Socket for an external This connector (under rubber dust cover) allows use of an optional, external GPS antenna with a antenna magnetic mounting. By placing this antenna on the roof of your vehicle, it is possible to improve reception of satellite signals in regions where GPS reception is poor. Drag Place your fingertip on the screen and move it in the desired direction. 11 Carrying Out a Reset Note: Carry out a reset under the following circumstances: Operation of the software is impaired. You are prompted to do so by an instruction manual or one of our service staff 1. If the navigation device is switched off, switch it on. Switch the device off by pressing the I/O button for at least 6 seconds. Ensure that the memory card with the navigation software has been inserted. Switch the device on again by pressing the I/O button for at least 6 seconds. The navigation software will be reinstalled. The navigation device is subsequently ready for use. 2. 5 Inserting a SD/MMC Card The navigation device has a SD/MMC slot into which a SD (Secure Digital) or MMC (MultiMediaCard) memory card can be inserted. Insert the memory card as illustrated in the diagram (with the sticker on the top and the bevelled corner in the device). Slide the card into the device until it locks into place. Before removing the card, ensure that it is not being used. [. . . ] The screen surface can easily be scratched. Universal protectors designed specifically for use with LCD panels may be used to help protect the screen from minor scratches. Do not clean the navigation device when it is turned on. To clean the device, use a soft, fluff-free cloth which has been moistened with water (Do not use cleaning agents). [. . . ]