User manual NAVIGON 3300

[. . . ] User's manual NAVIGON 33xx | 43xx max English (United Kingdom) January 2009 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification. Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG, nor may they be transmitted in any form either electronically or mechanically, including photocopying and recording. [. . . ] Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are listed. (Refer to "TMC (Traffic Information)" on page 58) Turn-by-Turn List: Shows detailed directions for the route, including all points at which you must turn. (Refer to "Turn-by-Turn List" on page 56) 6. 6 6. 6. 1 Working with the map Selecting the navigation map Each country has its own navigation map. Seamless navigation over several maps on one continent is possible however if a continuous route can be calculated with the maps saved on the device. Even if maps of countries in other continents are available on the navigation device, the NAVIGON 33xx | 43xx max can only ever work with the maps of a single continent. Tap in the NAVIGATION window on Options > Settings > Map Display in order to see which maps are currently in use. Here you can also select a different continent if the navigation device contains any maps of countries on other continents. 6. 6. 2 Map in Preview mode You have entered a destination and tapped on Start Navigation. - or You have planned or loaded a route and tapped on Show Route. - 46 - Navigation User's manual NAVIGON 33xx | 43xx max The map opens in Preview mode. 1 When the MyRoutes function is activated, up to three numbered routes are indicated on the map in different colours (orange, green, blue). When the MyRoutes function is deactivated or if you have planned a route with more than one route point, only one route is displayed. 2 The current position is indicated (orange arrow). If you display a planned or loaded route and the specified starting point is not your current location, then it is possible that your current position will not be shown on the preview. 3 Symbols on the (Route Profile) button indicate the current settings in the route profile. If you tap on this button, the ROUTE PROFILE settings window will open. The left symbol indicates which speed profile is set (in this example: car). The three symbols on the right indicate whether Motorways, Toll Roads and Ferries are permitted for calculating the route. 4 For each route (orange, green, blue) there is a button with the same number and a symbol in the same colour. Indicated on each button are the estimated time of arrival, the total distance and the estimated duration of the particular route. If the MyRoutes function is activated, the route corresponding best to the selected route profile will be marked with "MyRoute". As soon as you tap on a button, navigation along the route in question will start. 5 The destination is marked with a little flag. If you display a planned or loaded route, the starting point and each route point will be marked with a little flag. Navigation - 47 - User's manual NAVIGON 33xx | 43xx max In the case of a multi-leg route, the distance and the estimated driving time for each leg are displayed. Tap on the (Route Profile) button (see Figure, point 3) in order to view and if necessary change the profile on which the route calculation is based. To start the navigation, tap on the button for the route (see Figure, point 4) you want to use for the navigation. If you display a planned or loaded route, the route may be recalculated. The starting point for the calculation will now be your current location. You will first be guided to the first route point entered. Tap on Options > Turn-by-Turn List to view detailed directions for the route. (Refer to "Turn-by-Turn List" page 56) Tap on (Destination search) in order to view the map in Destination search mode. (Refer to "Map in Destination search mode" page 52) 6. 6. 3 Map in Navigation mode After the route was shown in Preview mode, navigation was started. [. . . ] 61 TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Traffic Information. . . . . . . . . . . . . . . . . . . . . . . . . 60 Tuning Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Trade marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]