User manual NAVIGON CONFIGURATION KIT 4.0

[. . . ] User's manual Navigon Configuration Kit 4. 0 User's manual Navigon Configuration Kit 4. 0 October 2004 Impressum NAVIGON GmbH Berliner Platz 11 D-97080 Würzburg Hotline (dtms-Service, 0, 12 /min): +49 180-5-NAVIKIT (+49 180-5-6284548) The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the express written consent of NAVIGON GmbH, nor transmitted in any form either electronically or mechanically, including photocopying and recording. Copyright 2004, NAVIGON GmbH All rights reserved. User's manual Navigon Configuration Kit 4. 0 Table of contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. 1 Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] [FileIO] GPSFile = C:\Temp\GPSOutput. txt As long as you are navigating, the system writes once in every second the GPS-data of your current position into a file. By default, output is in WGS-84 format: [GPS_WGS84] X= 10. 12737 Y= 53. 37844 Parameter FormatGPSFile Survey Using the FormatGPSFile parameter you may write the data of your travel in GPGGA or GPVTG format. [FileIO] GPSFile = C:\Temp\GPSOutput. txt FormatGPSFile = GPGGA As long as you are navigating, the system writes once in every second the GPS-data of your current position into the file indicated in the GPSFile parameter. Output is now in GPGGA or GPVTG format: $GPGGA, 000020, 4947. 870605, N, 00956. 5817, E, 1, 08, 1. 1, 203. 9 , M, 48. 0, M, , *4F $GPVTG, 69. 00, T, 69. 00, M, 0019. 5, N, 0036. 0, K*46 Special NCK functions - 76 - User's manual Navigon Configuration Kit 4. 0 Parameter Format Survey Setting the Format parameter to Tannis (Format=Tannis) makes data being read and written in the Tannis format. This has an influence on the coordinates of both the destination file (as indicated in the DestinationFile parameter) and the GPS-info file (as indicated in the GPSFile parameter). SRC=WEBMAP DST=WEBMAP DATA="SRC=WEBMAP DFN=SHOW GCL=GEO-WINDOW CLASS=GEO-WINDOW XMIN=10. 000793 YMIN=49. 804264 XMAX=9. 947522 YMAX=49. 804028" SRC=CARNAV DST=WEBMAP DATA="SRC=CARNAV DFN=SHOW GCL=GEO-WINDOW CLASS=GEO-WINDOW XMIN=10. 001405 YMIN=49. 812580 XMAX=10. 001405 YMAX=49. 812580" Example destination file (DestinationFile) Example GPS-info file (GPSFile) Parameter RouteList Survey In the [FileIO] section you may indicate a file (path and name) into which the way list with all its waypoints will be written as soon as the route has been calculated. [FileIO] RouteList = [File for Way list] For further information on the Way list, please refer to "Displaying the Way list", page 62. 5. 1. 3 Navigating to the destination of a destination file Survey When you have generated a destination file, e. g. via a track record, you may navigate to the indicated destination. The destination file must be indicated in the NCK. INI file using the DestinationFile parameter. [FileIO] DestinationFile=\Programme\NAVIGON\NCK 4. 0\Track\ POI_17_09_2004_12_03_01. txt GPSFile=\Programme\NAVIGON\NCK\GPSOutput. txt FormatGPSFile=GPGGA Delete=1 AutoStart=1 RouteList=C:\RouteList. txt AutoStart=0 When you have set the Autostart parameter to 0, NCK starts with the ADDRESS screen. The information of the destination file has been adopted into the respective entry fields. Example Special NCK functions - 77 - User's manual Navigon Configuration Kit 4. 0 Operating the software You have only restricted possibilities for operating NCK: Via the Show on map button, you may display the destination on the map. It will be highlighted by a blue circle: You may Start navigation. You may enter another address on the ADDRESS screen. AutoStart=1 When you have set the Autostart parameter to 1, NCK starts automatically in navigation mode. You won't have other possibilities for operating the software. 5. 1. 4 Survey GPS-data Configuration Kit may receive GPS-data not only from the GPSreceiver, but also from other interfaces. The necessary settings may be effected in the [GPS] section of the NCK. INI file. [GPS] GPSInput = Message | File |Simulation GPSInputFile = [File for GPS-Data] Using the GPSInput parameter, you may indicate the source from which Configuration Kit receives GPS-data. Notice: Make sure that GPS-data have been written in the NMEA format and once every second into the file before using this file as GPS-data source. If you don't set the GPSInput parameter or if it does not exist, NCK uses the standard GPS-receiver as source. Parameter GPSInput = Message Significance When Message is set, NCK tries to receive data from the Windows Message interface. See also "Transmitting GPS-data", page 89. When File is set, you must indicate a valid GPS-input file using the GPSInputFile parameter. [. . . ] 78 [POI] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 87 [Track] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Security information . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]