User manual NAVMAN B2

[. . . ] The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. such modifications could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] For more information on searching for Bluetooth devices, see the user manual supplied with your phone or PDA. If you are prompted for a passkey or device PIN, enter 1234. When pairing has completed, the B2 will say "Pairing successful". From now on, when the B2 is turned on, it will automatically detect and pair with your phone or PDA if it is in close proximity (if you have paired the B2 with more than one phone or PDA, it will pair with the one most recently used). The B2 will beep when successfully paired with your phone or PDA. Note: Your language will be automatically selected on the B2 if your phone or PDA supports this feature; otherwise, you can select the language yourself (see "Voice Menu" on page 10). You can pair up to five phones or PDAs with your B2, although only one phone or PDA may be paired with the B2 at any one time. If you attempt to pair a sixth phone or PDA, you will hear the message "Memory full". To clear the memory, you must press and hold + for three seconds. Note: The use of voice recognition, redial and changing calls between the B2 and your phone or PDA, depend on the model of phone or PDA you are using. Making a call manually Enter the number using your phone or PDA, then start the call. The call will automatically change to hands-free mode using the B2. Note: If the call does not change to the B2, press . Making a call using voice recognition Before you can make a call using voice recognition, you must have first recorded the correct keywords (see "Voice recognition" on page 11) and added at least one contact to the B2. After the beep, clearly say the name of the person you want to call. If the contact has more than one number assigned to it, clearly say the category of the number after the second beep, for example, "home", "work", "cellular", etc. The B2 will place the call via your phone or PDA. When an incoming call is received on the B2, you will hear a ringtone and see the and buttons flash. Note: Some versions of the Navman F-Series models may display Caller ID information on-screen when a call is received. When an incoming call is received while you are already on a call, you will hear a ringtone and see the buttons flashing. To redial the number you last called, press and hold for two seconds. The B2 will default to the level of volume used when it was last paired with the same phone or PDA. [. . . ] You can update the numbers assigned to a contact by resending the contact from your phone or PDA. For 24/7 help and support with Navman products, visit our Technical Support website at: support. At least 90% of our customers find answers to their questions at support. Com, however if you require further support, you can use the online email option to contact us. [. . . ]