User manual NAVMAN FISH 4430 SCHEMA

[. . . ] 16 4-2 Single and Dual frequency fishfinding . . 22 5 The Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5-1 Sonar display . . 27 6 Installation and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 FISH 4430/4433 Installation and Operation Manual NAVMAN 4 6-3 Mounting and removing the display unit . [. . . ] Tip: To quickly enlarge from manual to autorange hold down + or - key for 1. 5 seconds. 23 NAVMAN FISH 4430/4433 Installation and Operation Manual 5 The Displays Press DISP to show the Display menu. Use or to select display tab, then select a particular display using the or cursor keys. The Display menu is summarized here and each display is shown in the following sections. Most displays have an Options menu so that relevant features can be changed quickly. The Display menu Note: Refer to Section 3-2 Setup > Sonar, for information about customizing features on the sonar displays. Sonar display at a single or mixed frequency (section 5-1) Sonar split display with zoomed section (section 5-2) Show zoomed section of sonar Sonar flat bottom trace in zoomed section (section 5-3) Sonar split display with 83 and 200 frequencies (section 5-4) Sonar split display with echo strength (section 5-5) Show perspective view of sonar (section 5-6) Fuel data (section 5-7) Water temperature and depth history and boat data (section 5-8) Product and wiring information (section 5-9) 5-1 Sonar display Data header, set up to show the boat speed, sonar status etc. Surface Depth (medium size digits) Fish symbols with depth To show the Sonar display, press DISP and select Sonar Tab, select Sonar and press ENT. This display scrolls from right (most recent echoes) to left (oldest echoes) at the selected frequency (see section 3-2 Setup > Sonar). To change items, press MENU until the Options menu is shown. Range is explained in section 4-5 Range. A-scope is explained in section 5-5 Sonar A-Scope display. FISH 4430/4433 Installation and Operation Manual Bottom Range Data header The data header can be selected on or off. When selected, it is a customizable feature that can be used to display up to 9 data items, such as alarms or water temperature. 24 NAVMAN To customize the size of the Data header, highlight Size and press ENT. This can help to identify the type of bottom and objects close to the bottom. The zoom bar can only indicate the zoom range. It cannot indicate the zoom offset as this changes for each sounding displayed on the display. The zoom bar is fixed in the middle of the display. See section 4-5 Range, for information about adjusting the Zoom Range and Zoom Offset. To change items, press MENU until the Options menu is shown. Range is explained in section 4-5 Range. A-scope is explained in section 5-5 Sonar A-Scope display. Data header is explained in section 5-1 Sonar display. Bottom lock and Split ratio are explained in section 5-2 Sonar Zoom display. 5-4 Sonar 83/200 display To show the Sonar 83/200 display, press DISP and select Sonar Tab, select Sonar 83/200 and press ENT. This shows a split display, with the 83 kHz sonar history on the left side and the 200 kHz sonar history on the right side. [. . . ] Papua New Guinea Ph: +86 20 3869 8839 Lohberger Engineering, Fax: +86 20 3869 8780 Lawes Road, Konedobu. e-mail: sales@peaceful-marine. com PO Box 810, Port Moresby. web: www. peaceful-marine. com Ph: +675 321 2122 India Fax: +675 321 2704 Access India Overseas Pvt. e-mail: loheng@online. net. pg A-98, Sector 21, web: www. lohberger. com. pg Noida - 201 301, India. [. . . ]