User manual NAVMAN ICN 510

[. . . ] iCN 500 series with Smart 2005 TM User Manual iCN 510 iCN 520 English - Europe / Australia / New Zealand iCN 500 series | User Manual Contents Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iCN Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Positioning the iCN in a Vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Avoiding an Area You can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. If no alternative route around an Avoid Area exists, you will be routed through an Avoid Area. Adding an Avoid Area 1. Tap the Map screen or press the 4-way toggle button to display the cross-hairs. Use the stylus or 4-way toggle to position the intersection of the cross-hairs to the area that you want to avoid. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the Pop-up menu. Set the Avoid Area to the correct size and position using the 4-way toggle. Tap the Avoid Area or press the 4-way toggle to enable the Avoid Area. Deleting an Avoid Area 1. Tap the Map screen and move the cross-hairs over the Avoid Area that you want to delete. Tap the intersection of the cross-hairs, or press the 4-way toggle button to display the Pop-up menu. The Avoid Area is deleted. Deleting All Avoid Areas 1. From the Main Menu screen, tap Preferences. From the Preferences screen, tap My Data. From the My Data screen, tap Clear Data. When the warning dialog-box opens, select Yes. To return to the Main Menu, press . 56 iCN 500 series | User Manual 14. Route Demonstrator The Route Demonstrator allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. Step One: Activate Route Demonstrator 1. From the Main Menu screen, tap Preferences. From the Preferences screen, tap Routing. The Main Menu screen will display. Step Two: Select Departure Point If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. Tap the Map screen or press the 4-way toggle button to display the cross-hairs. [. . . ] Select the backup from the list, then click Restore. The Restore File Selection window will display. Select or clear the check boxes to indicate which part of the backup to restore. The Restore File Selection window will close and the backup will be restored. [. . . ]