User manual NAVMAN ICN 635

[. . . ] CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle's safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owner's manual regarding accessories or modifications. [. . . ] To install the maps, first install Smart TM Desktop software on your computer, then use it to install the required maps from the map CDs to your iCN internal memory or memory card. If you already have Smart Desktop installed on your computer, you need to reinstall the software from the enclosed Application Installer CD as it may contain an updated version. The number of discs included depends on the country of purchase. Smart Desktop is software for your computer and is used to install maps to your iCN. You can also use it to: remove maps from your iCN obtain software updates manage Custom Points of Interest. Can I use Smart Ensure your computer has the following minimum system requirements before installing Smart Desktop: IBM compatible PC Microsoft Windows 2000 SP4 or XP SP2 (NT not supported) Internet Explorer 6 or higher CD drive USB port Internet connection for registration. You must install Smart Desktop from the Application Installer CD onto your computer hard drive; you cannot run Smart Desktop from the CD. Microsoft ActiveSync is used to establish a connection between your iCN and your computer. 8 will be installed on your computer (if a later version of ActiveSync is not already installed) as part of the installation of Smart Desktop. After it is installed, ActiveSync will run in the Windows System Tray/Notification Area when you start Windows. ActiveSync will activate when your iCN is connected to your computer. Select the name of the map you want to remove from the list, then click Remove. Confirm that you want to remove the selected map when prompted. You cannot navigate a route between different version maps, for example a 2006 map and a 2006 SE map. You can install maps from the enclosed CDs to a memory card (not included) or your iCN internal memory. You will be prompted to enter the key during the activation of the new maps. Your Map Product Key can be found on the back cover of this Map Installation Guide. Additional Map Product Keys may be purchased from the Navman Online Store. To install new maps onto your iCN, complete the following steps: 1. Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 Insert a Smart Map CD into your computer CD drive. The preactivated maps that are ready to be installed to your iCN are light green. The maps on the CD that require activation before being installed to your iCN are light blue. [. . . ] In the Step 3: Install Maps section, select the destination media for the selected maps, for example, memory card or iCN internal memory. When they have been installed, the map or maps will change colour to yellow. WARNING Do not disconnect the USB cable from the iCN USB Socket until the Globe has refreshed, and the installed map or maps have changed colour to yellow. For information on how to use Smart 2006, see the iCN 700 Series User Manual. [. . . ]