User manual NAVMAN TRACKER 5110I

[. . . ] C o m TRACKER 5500i TRACKER 5100 NAVMAN FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] 2 10-3-3 Cancelling a route To stop the boat navigating along a route: In the chart display, press MENU and select Cancel route. NAVMAN TRACKER 5100/5100i/5500/5500i Installation and Operation Manual 23 11 User card display A C-MAP™ user card is an optional plug-in card that can store data files (see section 1-2). there are three types of files: waypoints , routes or a track. To go to the user card display, press DISP and select User card. The user card display has: File list A list of the files on any user card in the TRACKER. Waypts, Routes The number of waypoints and routes currently in the TRACKER. Track 1 to Track 5 The number of points in tracks 1 to 5 currently in the TRACKER. Note: To save TRACKER data onto the user card, use the Save command (see below). Data stored on the user card and shown on the file list is not available to be used by the TRACKER until loaded into the TRACKER with the LOAD command (see below). Saving TRACKER data to the user card This saves all the TRACKER’s waypoints, all the TRACKER’s routes or one of the TRACKER’s tracks to one file on the user card. For Tracks, select the track number to save. A routes file: The new routes are added to any existing routes in the TRACKER. A track file: The new track will replace the existing track in the TRACKER. To load a file to the TRACKER: 1 Select the file to load. Loading data from the user card to the TRACKER This loads one file from the user card to the TRACKER: A waypoints file: The new waypoints are added to any existing waypoints in the TRACKER. If a new waypoint has the same name as an existing waypoint but has different data, the TRACKER displays both waypoints. Select: Skip: Do not load the new waypoint. Replace: Load the new waypoint and replace the existing one. Skip all: Do not load any new waypoints which have the same names as existing waypoints. All: Load all new waypoints which have the same names as existing waypoints; the new waypoints replace the existing waypoints. 24 Deleting a file from the user card 1 2 3 Select the file to delete. Reading the file information This reads the file names from the user card and displays them. [. . . ] Route: Two or more waypoints linked in sequence to form a course for the boat (see section 10). User card - A plug-in card that stores waypoints, routes and tracks (see section 1-2). UTC - Universal Time Coordinated or Coordinated Universal Time, which is a standard world time, formerly called Greenwich Mean Time (GMT). waypoint - A user-definable chart position (see section 9). [. . . ]