User manual NAVMAN TRACKER 5380

[. . . ] Pilot 3380 Tracker 5380 AU C H A R T PT LO O P T I T L E O R T Installation and Operation Manual www. navman. com FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] If the blue curve has a dip, then running the boat at this RPM will give the best speed for the least fuel consumption. 34 NAVMAN TRACKER 5380 Installation and Operation Manual 11 Tides display The tides display is available on C-MAP charts. The tides display shows tide information at a tide station for the selected date. Note: The tides display requires the local time offset to be set to work correctly (see section 14-11) To show the tides display for the tide station nearest to the boat, press , select Other, then select Tides. To go to the tides display for any tide station: 1 2 From the chart display, press select Find. and 3 A list of tide stations are displayed. The chart redraws with the tide station centred. Press . 4 5 1 2 Choosing the date of the tide chart Select Today, Next day or Prev day . To choose a different date from these, select Set date, edit the date, . press The tides display shows data for the chosen date A Tide station name and distance from boat B Current time and chosen date for display A B N C Tide chart D Night DE C F G L H M I J K J K L D E F Dawn Day G Dusk H Tide height I Time cursor, a vertical dotted line. Press or to move cursor sideways Time of cursor and tide height at that time Data for the chosen date Tide height cursor, a horizontal dotted line. Press or to move cursor up and down. M Height of cursor on the tide chart N Moon phase for moon at the current time on the chosen date TRACKER 5380 Installation and Operation Manual NAVMAN 35 12 User card display A C-MAPTM user card is an optional plug-in card that can store data files (see section 1-4). There are three types of files: waypoints, routes or a track. To go to the user card display, press select Other, then select User card. Note: 1 Before using a user card, remove any chart card and plug the user card in. When you have finished with the user card, remove the user card and replace the chart card (see section 1-3). The older 5 volt cards are not supported. , 2 The user card display has: File list A list of the files on any user card in the TRACKER. If there are more files than will fit on the display, press or to scroll up or down a page at a time. Waypts, Routes The number of waypoints and routes currently in the TRACKER. Track 1 to Track 5 The number of points in tracks 1 to 5 currently in the TRACKER. Note: 1 To save TRACKER data onto the user card, use the Save command (see below). 2 Data stored on the user card and shown on the file list is not available to be used by the TRACKER until loaded into the TRACKER with the LOAD command (see below). [. . . ] LATIN AMERICA Ph: +91 120 244 2697 Argentina TeleFax: +91 120 253 7881 Costanera Uno S. A. Mobile: +91 98115 04557 Av Pte Ramón S. Castillo y Calle 13 e-mail: vkapil@del3. vsnl. net. in Zip 1425 Buenos Aires, Argentina. Esmario Export Enterprises Ph: +54 11 4312 4545 Block No. [. . . ]