User manual NAVMAN TRACKER 950

[. . . ] C H A TRACKER950 R T P L O T T E R Installation and Operation Manual English. . . . . . . . . . . . . . . 4 Français. . . . . . . . . . . 44 w w w. c o m NAVMAN ® Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1-1 Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1-2 C-MAPTM chart cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] List: Display a list of the routes, see section 6-2-5). 6-2-3 Create a new route by selecting waypoints from a list 1 2 In the routes screen, press the TxtCrt key to display a new, empty route list. To change the name, press the Edit key and use the cursor keys to change the name, then press the Enter key. To add a waypoint to the route, press the CursorUp or CursorDown keys to move the highlight up or down the route to where you want to add the waypoint. Press the CursorUp or CursorDown keys to move the highlight to the waypoint, then press the Enter key. 4 To delete a waypoint from the route, press the CursorUp or CursorDown keys to move the highlight to the waypoint. 5 Repeat this process until the route is finished. Press the Done key to save the new route. 3 6-2-2 Routes screen To display the Routes screen: 1 2 Go to the Navigation screen. Press the Routes key. 6-2-4 Create a new route by selecting waypoints from a chart Choose waypoints in the order in which they will be traversed. 1 2 3 The softkeys available in the Routes screen are different if the boat is navigating along a route or not: If the boat is not navigating a route, the softkeys are: TxtCrt: Create a new route by selecting waypoints from a list (see section 6-2-3). Create: Create a new route by selecting waypoints from a chart (see section 6-24). List: Display a list of the routes (see section 6-2-5). If the boat is navigating a route, the softkeys are: NAVMAN In the routes screen, press the Create key. Move the cursor to the start of the route. If the cursor is over an existing waypoint it is added to the route. If the cursor is not over an existing waypoint, it creates a new waypoint there and displays a window of data for the waypoint. You can edit this as described in section 6-1-6, then press the Save key. The waypoint is added to the route. 4 Repeat the step above to add the remaining waypoints to the route. Press the Undo key to remove the last waypoint from the route. 5 6 When the route is finished, press the Save key. Use the 23 RteOff: Stop navigating along the route. TRACKER950 CHARTPLOTTER Installation and Operation Manual cursor keys to change the name, then press the Enter key. 6-2-5 List the routes In the Routes screen, press the List key to display a list of all the routes. Use the cursor keys to highlight a particular route. The softkeys keys are: Display: display the highlighted route as a chart (see section 6-2-6). Delete: delete the highlighted route Start: Start the highlighted route (see section 6-2-7). [. . . ] The distance from the boat to the original plotted course. The speed at which the boat is approaching the destination. NAVMAN TRACKER950 CHARTPLOTTER Installation and Operation Manual Appendix D - Conditions of Sale & Warranty IMPORTANT: Some of the following terms and conditions vary from country to country. Please check with your NAVMAN dealer from whom you purchased your product. A. Conditions of Sale Except to the extent otherwise required by the laws of the country in which the accompanying product ("the product") is sold the manufacturer of the product Talon Research & Development Co. [. . . ]