User manual NAVMAN TRACKFISH 6600

[. . . ] TRACKF I S H 6600 CHARTPLOTTER and FISHFINDER Installation and Operation Manual www. navman. com NAVMAN FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] To show the tides display for the tide station nearest to the boat, press DISPLAY, select Other, then select Tides. To go to the tides display for any tide station: 1 2 3 From the chart display, press MENU and select Find. The chart redraws with the tide station centred. Choosing the date of the tide chart 1 Press MENU. To choose a different date from these, select Set date, edit the date, press ENTER. The tides display shows data for the chosen date: Tide station name Distance from boat Current time Chosen date for display Tide chart Night Dawn Day Night Dusk Day Tide height cursor. Height of cursor Time cursor Press or to move cursor sideways Time of cursor Tide height at that time Height and time of highest high water and lowest low water on tide chart. Time of day, 0 to 24 hrs Times on selected date Moon phase for moon at the current time on the chosen date Tide height 46 NAVMAN TRACKFISH 6600 Installation and Operation Manual 13 User card display A C-MAPTM user card is an optional plug-in card that can store data files (see section 12). There are three types of files: waypoints, routes or a track. To go to the user card display, press DISPLAY, select Other, then select User card. Note: The older 5 volt cards are not supported. The user card display has: File list A list of the files on any user card in the TRACKFISH. If there are more files than will fit on the display, press or to scroll up or down a page at a time. Waypts, Routes The number of waypoints and routes currently in the TRACKFISH. Track 1 to Track 5 The number of points in tracks 1 to 5 currently in the TRACKFISH. Note: To save TRACKFISH data onto the user card, use the Save command (see below). Data stored on the user card and shown on the file list is not available to be used by the TRACKFISH until loaded into the TRACKFISH with the LOAD command (see below). Saving data to the user card This saves all the TRACKFISH's waypoints, all the TRACKFISH's routes or one of the TRACKFISH's tracks to one file on the user card. For Tracks, select the track number to save. The new file appears in the file list. Loading data from the user card to the TRACKFISH This loads one file from the user card to the TRACKFISH: A waypoints file: The new waypoints are added to any existing waypoints in TRACKFISH 6600 Installation and Operation Manual the TRACKFISH. If a new waypoint has the same name as an existing waypoint but has different data, the TRACKFISH displays both waypoints. Select: Skip: Do not load the new waypoint. Replace: Load the new waypoint and replace the existing one. Skip all: Do not load any new waypoints which have the same names as existing waypoints. [. . . ] #604-842, 2F, 1118-15, Janglim1-Dong, Saha-Gu, Busan, Korea. Ph: +82 51 293 8589 Fax: +82 51 265 8984 e-mail: info@kumhomarine. com web: www. kumhomarine. com Maldives Maizan Electronics Pte. Mobile: +960 78 24 44 Ph: +960 32 32 11 Fax: +960 32 57 07 e-mail: ahmed@maizan. com. mv Singapore and Malaysia RIQ PTE Ltd. Blk 3007, 81 Ubi Road 1, #02-440, Singapore 408701. [. . . ]