User manual NEC 2464 INSTALLATION MANUAL

[. . . ] Issue-1 December, 1998 HYBRID TELEPHONE SYSTEM GROUPHONE INSTRUCTION AND INSTALLATION MANUAL Model 308/824/1232/2464 RECORD OF REVISION Issue No. 1 Date December, 1998 Remarks 1st release for following ROM version: TX-Z 308: 3. 0 TX-Z 824: 5. 0 TX-Z 1232/2464: 3. 0 (CPU-B1) Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and Nitsuko has no obligation to provide any updates or corrections to this manual. Further, Nitsuko also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and Nitsuko shall not be liable for any errors or omissions. [. . . ] RELATED SYSTEM DATA: Not applicable. n Headset Operation DESCRIPTION: A KTS user can utilize a customer-provided headset in place of the handset. Like using Handsfree, using the handset frees up the user's hands for other work. However, Headset Operation provides privacy not available from Handsfree. While in the headset mode, the hook switch should be On-Hook condition. To use this facility, system requires optional item as follows; - Recommended Headset set - Multi-Purpose-Amplifier (8833-81-00) - Profile (1861-00, 1862-00 or 1863-00) - Cable (8800-01-01 or 8800-00-01) (All Items are Made by GN Netcom) STATION APPLICATION: KTS ¾ 4-75 ¾ Other Features OPERATION: To answer the Trunk Incoming Call: 1. To place the Trunk Line outgoing call: 1. To transfer the Trunk line: Refer to "Unannounced Transfer" and "Announced Transfer" operations. But Headset user substitutes "Press SPK" for "Hang up" in these operations. RELATED SYSTEM DATA: #04-E: Headset n Hotel/Motel Features(TX-Z 1232/2464) u SLT Hold Cancel DESCRIPTION: The system provides the mode that Single Line Telephones can not use flashing operation. Once the data "1" is input at Program #64-E, flashing function from Single Line Telephones connected to the system is ignored. This feature is useful for prohibiting guest phones' putting calls on hold. STATION APPLICATION: SLT OPERATION: None RELATED SYSTEM DATA: #64-E: SLT Holding Operation u DSS Mode Switching DESCRIPTION: The extension paired with a DSS console allows the DSS console to indicate extension status in three modes. Business, Room Status, and Wakeup modes are available. STATION APPLICATION: KTS ¾ 4-76 ¾ Other Features OPERATION: To switch to Business mode: 1. Dial 75. Note: If Program #75-D is 0 (No tone), skip Step 2. These functions can be assigned to Line key, One-Touch key, or DLS key. 26: Wakeup) When assigned, the corresponding key will light to indicate the mode. The mode switching operation is effective only in on-hook status. The LED indication and status in each mode are as follows: LED Light Extinguish 0. 1 sec On/0. 1 sec OFF 0. 5 sec ON/0. 5 sec OFF 0. 4 sec On/0. 1 sec OFF 0. 1 sec ON/0. 1 sec OFF/0. 1 sec ON/0. 7 sec OFF Business Busy Idle DND set MW set Ringing Room Status Check in Check out Maid required Maid in room Reserved Unavailable Wakeup Wakeup call set No answer to Wakeup call RELATED SYSTEM DATA: #62: DSS Console Port Assignment u Room Status DESCRIPTION: When the DSS console is in Room Status Mode, Room Status can be changed at No. 10 extension or at all extensions according to Program #80-2-B. STATION APPLICATION: KTS, SLT ¾ 4-77 ¾ Other Features OPERATION: To change room status in Room Status mode: <KTS> 1. Hang up. Note 1: If Program #75-D is 0 (No tone), skip Step 2 (TX-Z 824/1232/2464). Note 2: Status Numbers are as follows: No. Indication Meaning 0 Check In Guest is in the room. 1 Maid Required Guest left the room and cleaning is required for Maid. 2 Maid In Room Guest left the room and Maid is cleaning the room. [. . . ] CONFERENCE A maximum of 6 parties can join Conference. When the other extension hangs up, this extension rings. Intercom conversation is established when the other extension answers the call. Lift handset and hang up. 2. 5 Intercom Callback 6. 1 Add-On Conference To set Add-On Conference: - Dial Plan 1, 2 1. Dial 93 and dial extension number of another inside party. [. . . ]