User manual NEC 42 VP5 VM5

[. . . ] Operation Manual For the specifications of your plasma monitor, refer to "Model Information". ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Do not attempt to service or repair the unit. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized Service Centers. [. . . ] Use and buttons to select "ON", then press the MENU/ ENTER button. E-17 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass On "BASS" of "AUDIO" menu, adjust the bass. AUDIO BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 Image Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode On "V-POSITION" of "IMAGE ADJUST" menu, adjust the position. The mode switches as follows each time the or button is pressed: NORMAL FULL : : : VIDEO1 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN * The mode can also be switched by pressing the WIDE button on the remote control. * The settings on the IMAGE ADJUST menu are not preset at the factory. IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. Note : If "CAN NOT ADJUST" appears. . . Set "AUDIO INPUT" on the AUDIO menu correctly. Information Audio settings menu BASS: Controls the level of low frequency sound. TREBLE: Controls the level of high frequency sound. BALANCE: Controls the balance of the left and right channels. V-POSITION +64 Information When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting "AUDIO INPUT1" to "VIDEO 2" On "AUDIO INPUT1" of "AUDIO" menu, select "VIDEO2". The available sources depend on the settings of input. AUDIO BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 : : : VIDEO2 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN Information AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. When Auto Picture is off, the Fine Picture and the Picture ADJ. items are displayed so that you can adjust them. Adjusting the Auto Picture ON: The Picture ADJ. , Fine Picture and Position adjustments are made automatically. OFF: The Picture ADJ. , Fine Picture and Position adjustments are made manually. * If FINE PICTURE can't be adjusted, set Auto Picture to OFF and adjust manually. Adjusting the position of the image V-POSITION: Adjusts the vertical position of the image. H-POSITION: Adjusts the horizontal position of the image. V-HEIGHT: Adjusts the vertical size of the image. (Except for STADIUM mode) H-WIDTH: Adjusts the horizontal size of the image. (Except for STADIUM mode) FINE PICTURE*: Adjusts for flickering. [. . . ] · The front panel buttons do not function during Control Lock. · Is the monitor's power cord plugged into a power outlet?· Is the volume set at the minimum?· Are the speakers properly connected? [. . . ]