User manual NEC 42MP1USERMAN

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. [. . . ] The last picture adjustments are stored here. Set this mode when watching video in a dark room. This mode provides darker, finer pictures, like the screen in movie theaters. CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode NORMAL . . . . . . . Set this mode when watching video in a bright room. This mode provides dynamic pictures with distinct differences between light and dark sections. CONTRAST = 96% for RESET mode RESET . . . . . . . . . . Use this to reset the picture to the factory default settings. PICTURE MODE : THEATER * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 19 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "1" Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . Use the and buttons to select "PICTURE", then press the "PROCEED" button. Use the and buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. Press the "EXIT" button to return to the main menu. To delete the main menu, press the "EXIT" button once more. Information Setting the color temperature 1 . . . . . . . . . . . . . . . . . . . . . . . . . High (bluer) 2 . . . . . . . . . . . . . . . . . . . . . . . . . Middle (Standard) 3 . . . . . . . . . . . . . . . . . . . . . . . . . Low (redder) Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. G EXIT RETURN 3. Use the and buttons to select "1". The mode switches as follows when the buttons are pressed: 1 2 3 PRO and * See page 21 to set "PRO". COLOR TEMP. : 1 If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reppears. The "COLOR TEMP. " is set to "1". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. ADJ. R G : MEMORY :1 : NR-2 EXIT RETURN 20 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality. Example: Adjusting the "WHITE BALANCE" Press the PROCEED button on the remote controller to display the MAIN MENU on the screen, then. . . [. . . ] · Press the remote controller's mute button. · Set AUDIO INPUT on the OPTION menu correctly. · Adjust picture control as needed. · Adjust picture controls as needed. [. . . ]