User manual NEC 42VR5

[. . . ] Operation Manual For the specifications of your plasma monitor, refer to "Model Information". ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Do not attempt to service or repair the unit. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized Service Centers. [. . . ] ALL RESET RESET NO YES YES NO YES NO NO NO YES YES YES YES YES -- REFERENCE E-19 E-19 E-19 E-19 E-19 E-20 E-20 E-20 E-20 E-21 E-21 E-21 E-21 E-21 ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/ / RGBCOMPONENTSCART1SCART2 RGBSCART3 1080I/1035I/540P AUTO/STILL/MOTION/WIDE1/WIDE2/WIDE3/DTV PLUG/PLAY PCSTB/DVD BLACK LEVEL LOWHIGH AUTO/PAL/PAL-M/PAL-N/PAL 60/SECAM/4. 43 NTSC/3. 58NTSC BLACK/GRAY 0. . . 3. . . 15 AUTOOFF ONOFF TOP LEFTTOP CENTERTOP RIGHTBTM LEFTBTM CENTERBTM RIGHT ONOFF E-13 Main menu FUNCTION Sub menu POWER MGT. INPUT SKIP PDP SAVER Sub menu 2 ONOFF ONOFF MANUAL/AUTO PEAK BRIGHT ORBITER INVERSE/WHITE SCREEN WIPER SOFT FOCUS OSM ORBITER OSM CONTRAST Sub menu 3 Sub menu 4 RESET YES YES YES YES YES YES YES YES YES YES REFERENCE E-22 E-22 E-22 E-23 E-23 E-23 E-23 E-23 E-24 E-24 100%/75%/50%/25% OFF/AUTO1/AUTO2 OFF/INVERSE/WHITE ON/OFF OFF/LEVEL1-4 ON/OFF LOW/NORMAL Main menu SIGNAL INFO. Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET -- REFERENCE E-24 *1 Only when AUTO PICTURE is OFF. *2 RGB/PC only Information Restoring the factory default settings Select "ALL RESET" under the SET UP menu. Note that this also restores other settings to the factory defaults. E-14 Picture Settings Menu Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary. There are six picture memories, and notes of up to 15 characters can be added to each. Example: Storing picture settings at MEMORY1 On "PICTURE MEMORY" of "PICTURE" menu, select "MEMORY1", then press the MENU/ENTER button. The "PICTURE MEMORY" screen appears. PICTURE MEMORY MEMORY1 SET INPUT : DVD/HD1 SIGNAL : 480P NOTE : DVD/STAR WARS MEMORY2 INPUT : -- SIGNAL : -- NOTE : -- MEMORY3 INPUT : -- SIGNAL : -- NOTE : -- NEXT PAGE SEL. 1/2 RESET PICTURE MEMORY PREVIOUS PAGE MEMORY4 SET INPUT : -- SIGNAL : -- NOTE : -- MEMORY5 INPUT : -- SIGNAL : -- NOTE : -- MEMORY6 INPUT : -- SIGNAL : -- NOTE : -- SEL. MENU/ENTER OK 2/2 RESET Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast On "CONTRAST" of "PICTURE" menu, adjust the contrast. PICTURE : OFF PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR R TINT : OFF NR : MIDDLE COLOR TEMP. : 2. 2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL COLOR TUNE : ON CINEMA MODE : NORMAL PICTURE MODE SEL. EXIT RETURN G CONTRAST 10 Note: If "CAN NOT ADJUST" appears . . . When trying to enter the PICTURE submenu, make sure PICTURE MODE is not set to DEFAULT. Information Picture adjustment screen CONTRAST: Changes the picture's white level. BRIGHTNESS: Changes the picture's black level. SHARPNESS: Changes the picture's sharpness. Adjusts picture detail of VIDEO display. Adjust for natural colored skin, background, etc. Adjusting the computer image Only the contrast and brightness can be adjusted when a computer signal is connected. Restoring the factory default settings Select "DEFAULT" under the "PICTURE MODE" settings. EXIT RETURN EXIT RETURN Information PICTURE MEMORY Settings OFF: Picture memory not used. MEMORY1 to 6: Picture memory with the specified number used. Maximum memories are 6, not depending on inputs. [. . . ] · Are the remote control's batteries worn out?· Is the monitor's power cord plugged into a power outlet?· Is the volume set at the minimum?· Are the speakers properly connected? [. . . ]