User manual NEC 50XM4

[. . . ] Operation Manual (Enhanced split screen Model) For the specifications of your plasma monitor, refer to "Model Information". ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Do not attempt to service or repair the unit. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized Service Centers. [. . . ] H-POSITION: Adjusts the horizontal position of the image. V-HEIGHT: Adjusts the vertical size of the image. (Except for STADIUM mode) H-WIDTH: Adjusts the horizontal size of the image. (Except for STADIUM mode) FINE PICTURE*: Adjusts for flickering. PICTURE ADJ. *: Adjusts for striped patterns on the image. and Fine Picture features are available only when the "Auto Picture" is off. * The AUTO PICTURE, FINE PICTURE and PICTURE ADJ. But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB. E-20 Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: Turning the DISPLAY OSM off On "OPTION1" menu, select "OSM", then press the MENU/ ENTER button. On "DISPLAY OSM" of "OSM" menu, select "OFF". OSM DISPLAY OSM OSM ADJ. OSM ANGLE OSM ORBITER OSM CONTRAST : : : : : OFF 1 H OFF LOW Setting the BNC connectors Select whether to set the input of the 5 BNC connectors to RGB, component or SCART1, 2. Example: Set the BNC INPUT mode to "COMP. " On "BNC INPUT" of "OPTION1" menu, select "COMP. ". 1/4 OPTION1 OSM BNC INPUT : COMP. D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE EXIT RETURN SEL. ADJ. SEL. ADJ. EXIT RETURN Information DISPLAY OSM settings ON: The on-screen menu appears. OFF: The on-screen menu does not appear. If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON). OSM ADJUST settings Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6. Information BNC INPUT Settings RGB: Use the 5BNC terminals for RGB input. COMP. : Use the 3BNC terminals for component input. SCART1: Use the 4BNC terminals for RGB with composite sync. SCART2: Use the 3BNC terminals for RGB and the VIDEO1 terminal for composite sync. [. . . ] · The front panel buttons do not function during Control Lock. · Is the monitor's power cord plugged into a power outlet?· Is the volume set at the minimum?· Are the speakers properly connected? [. . . ]