User manual NEC DSX-40 DEMO KIT QUICK START GUIDE

[. . . ] DSX-40 Demo Kit Quick Start Guide Important · · DSX-40 Cabinet Always check www. necdsx. com for the latest system software updates. To check the software level, press INTERCOM and dial # * #*. DSX IntraMail 1093061 - 1 Cable 1 Surge Protector Dedicated AC Outlet Cable 2 Cable 3 To electrical service ground Loops built-in analog stations to lines 1 and 2 to simulate outside lines. 302 8- Conductor Cable P/N 80891 301 back of unit Adaptor P/N 80890 300 Making Lines Ring To ring this line: Line 1 Line 2 Do this: Press INTERCOM and dial 324 Press INTERCOM and dial 325 Important These instructions are for reference only. [. . . ] (See the Central Office Calls, Placing feature for more. ) All extensions have full incoming and outgoing access to all outside lines. · See Initial Startup Programming below to change this assignment. By default, Feature Keys 1-12 are line keys. See the Feature Keys feature for more. Default Features for IntraMail 2. 3. 3. Each extension has an IntraMail voice mailbox. To disable a mailbox, see 2141-01: Station Mailbox Type. The IntraMail Automated Attendant does not answer outside calls. (See the Automated Attendant feature for more. ) Initial Startup Programming 1. From any display telephone, press INTERCOM + Dial #*#* + Enter the system password + HOLD. The system passwords are: - 632379 (NECDSX) for Installer (level 3), 9999 for System Administrator 2 (level 2), 0000 for System Administrator 1 (level 1). 2. Assign the correct circuit type to each of your installed lines. In 3101-01: Line Type, assign the line circuit type (e. g. , enter 1 or press Feature Key 2 for loop start). [. . . ] To change the default system passwords: 1. Turn to the System Programming Password Protection feature to learn more about system passwords. (1093061) January 18, 2007, Rev 1 Printed in U. S. A. Empowered by Innovation [. . . ]