User manual NEC DSX-80 DEMO KIT QUICK START GUIDE

[. . . ] DSX-80 Demo Kit Quick Start Guide 1093096 - 56 DSX-80 Cabinet Important Always check www. necdsx. com for the latest system software updates. 8SLIU PCB 16ESIU PCB CPU Power Supply 8COIU PCB Surge Protector Dedicated AC Outlet To Electrical Service Ground 302 Optional DSX IntraMail 8-Conductor Cable P/N 80891 back of unit Adaptor P/N 80890 301 300 Making Lines Ring To ring this line: Line 1 Line 2 Line 3 Line 4 Do this: Press INTERCOM and dial 316 Press INTERCOM and dial 317 Press INTERCOM and dial 318 Press INTERCOM and dial 319 Important These instructions are for reference only. Do not install the system without first reading the Hardware Manual. Basic Installation Layout Default Features Default Features for Lines 1. [. . . ] (See the Central Office Calls, Placing feature for more. ) All extensions have full incoming and outgoing access to all outside lines. · See Initial Startup Programming below to change this assignment. By default, Feature Keys 1-12 are line keys. See the Feature Keys feature for more. Default Features for IntraMail 2. 3. 3. Each extension has an IntraMail voice mailbox. To disable a mailbox, see 2141-01: Station Mailbox Type. The IntraMail Automated Attendant does not answer outside calls. (See the Automated Attendant feature for more. ) Initial Startup Programming 1. From any display telephone, press INTERCOM + Dial #*#* + Enter the system password + HOLD. The system passwords are: - 632379 (NECDSX) for Installer (level 3), 9999 for System Administrator 2 (level 2), 0000 for System Administrator 1 (level 1). 2. Assign the correct circuit type to each of your installed lines. In 3101-01: Line Type, assign the line circuit type (e. g. , enter 1 or press Feature Key 2 for loop start). [. . . ] To change the default system passwords: 1. Turn to the System Programming Password Protection feature for more about system passwords. (1093068) November 10, 2006, Rev 3 Printed in U. S. A. Empowered by Innovation [. . . ]