User manual NEC HT510

[. . . ] Entertainment Projector HT510/HT410 User's Manual English Deutsch Français Italiano Español Svenska IMPORTANT INFORMATION IMPORTANT INFORMATION Safety Cautions Precautions Please read this manual carefully before using your NEC HT510/HT410 Projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. [. . . ] Cabinet controls Remote control PIC-MUTE OFF TIMER FREEZE TIMER MUTE decrease volume LAMP STATUS POWER increase volume increase volume HELP VOLUME KEY STONE LIGHT decrease volume SOURCE SELECT ON/STAND BY AUTO ADJ. NOTE: When no menus appear, the SELECT and buttons on the projector cabinet work as a volume control. E-27 3. PROJECTING AN IMAGE (BASIC OPERATION) Turning off the Projector To turn off the projector: First, press the ON/STAND BY button on the projector cabinet or the POWER OFF button on the remote control. The "Power Off / Are you sure?" message will appear. Cabinet controls Remote control OFF LAMP STATUS POWER POWER ON COMPONENT COMPUTER VIDEO SOURCE C-VIDEO COMP. AUTO ADJ. SELECT S-VIDEO ON/STAND BY AUTO ADJ. AUTO MENU Second, press the ENTER button or press the ON/STAND BY or the POWER OFF button again. After the projector turns off, the cooling fans keep operating for 60 seconds (Cooling-off time). Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds. Power On LAMP STATUS POWER Fan running LAMP STATUS POWER Standby LAMP STATUS POWER Steady green light Blinking orange light Steady orange light NOTE: To avoid premature lamp failure, wait at least 5 minutes before turning on or off the projector. DEO IN S-VI no L/mo b Cb/P Y R CON TRO L CAUTION Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector: · While the projector is turned on. · While the cooling fans are running. (The cooling fans continue to work for 60 seconds after the projector is turned off). E-28 3. PROJECTING AN IMAGE (BASIC OPERATION) After Use Preparation: Make sure that the projector's main power is off. Retract adjustable tilt foot if extended. Put the projector and its accessories in the supplied soft case. E-29 4. CONVENIENT FEATURES Turning Off the Image and Sound Press the MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOISE RED. PICTURE OFF TIMER TIMER HELP VOLUME KEY STONE LIGHT Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOISE RED. PICTURE OFF TIMER TIMER HELP VOLUME KEY STONE LIGHT Reducing Video Noise (Noise Reduction) You can reduce video noise by using the N. button to turn on the Noise Reduction feature. You can also reduce video noise by using the menu. PICTURE OFF TIMER TIMER HELP VOLUME KEY STONE LIGHT E-30 4. [. . . ] Service Options: There are 3 types of "Service" available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time. [. . . ]