User manual NEC LT240K

[. . . ] CD-ROM version Portable Projector LT260K/LT240K User's Manual About this user's manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user's manual. At the beginning of each section of the manual you'll find an overview. If the section doesn't apply, you can skip it. INTRODUCTION Introduction to the Projector This section introduces you to your new LT260K/LT240K Projector and describes the features and controls. Congratulations on Your Purchase of The LT260K/ LT240K Projector The LT260K/LT240K is one of the very best projectors available today. [. . . ] Select "Source Name" and press ENTER to display the Source Name Edit window. You can change source name on this window. Press [ ] to display the software keyboard, which you can enter alphanumeric characters. See page E-137 for the key function of the software keyboard. The following buttons are not available for the currently projecting signals: 1) The Cut and Paste buttons on the Entry Edit Command screen 2) The Input Terminal button on the Entry Edit screen All Delete: This feature enables you to delete all the registered signals in the Entry List. NOTE: When all the signals in the Entry List are deleted, the currently projected signal will be also deleted except locked signals. Select "Input Terminal" and press ENTER to display the Input Terminal window. E-84 USING ON-SCREEN MENU Menu Descriptions & Functions Picture (not available for Viewer and LAN) Adjusting Brightness, Contrast, Color, Hue, and Sharpness Brightness . . . . . . . Adjusts the brightness level or the back raster intensity. Adjusts the intensity of the image according to the incoming signal. Increases or decreases the color saturation level (not valid for RGB). Varies the color level from +/- green to +/-blue. This adjustment is only valid for Video and Component inputs (not valid for RGB). Controls the detail of the image for Video (Not valid for RGB). Volume Controllling Volume Adjusts the sound level of the projector speaker and AUDIO OUT. E-85 USING ON-SCREEN MENU Menu Descriptions & Functions Image Options Selecting Aspect Ratio (not available for Viewer and LAN) Aspect Ratio allows you to select the best Aspect mode to display your source image. When screen size 4:3 is selected for the source, the following selections will display: 4:3 . . . . . . . . . . . . . . . . . . . Reduced to display the true aspect with black borders on top and bottom Wide Screen . . . Left & Right stretched with black borders on top and bottom Crop . . . . . . . . . . . . . . . . When screen size 16:9 is selected for the source, the following selections will display: 4:3 Window . . . . . Reduced to display the true aspect with black borders on right and left Letter Box . . . . . . . . Left and right streched to display the true aspect 4:3 Fill . . . . . . . . . . . . . Stretched to display in 16:9 aspect ratio NOTE: You can adjust image positions vertically for source with black borders. See page E-101 for setting image positions. [. . . ] Service Options: There are 3 types of "Service" available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time. [. . . ]