User manual NEC MSERIES

[. . . ] NEC Multimedia Series MultiSync M Series User's Manual User's Manual Contents 1 Quick Start 2-3 Controls 4-7 Recommended Use 8-9 Specifications 10-11 Features 12 Troubleshooting 13 References 14 Limited Warranty 15 ® ® 78133441 1 6/24/98, 7:49 AM WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK · DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] To activate the OSM Lock Out function, press PROCEED, then and hold down simultaneously. To de-activate the OSM Lock Out, press PROCEED, then and hold down simultaneously. Vertical Linearity: This selection allows you to adjust the spacing of the area on the screen. The purpose of this control is to ensure that a one-inch circle is a true one-inch circle wherever it is on the screen. The best way to determine the vertical linearity is as follows: · Draw equally spaced horizontal lines using a drawing application that has a ruler. · Use the Vertical control to adjust the spacing between the lines near the center of your screen. · Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire. · Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor. · Keep the monitor away from high capacity transformers, electric motors and other devices such as external speakers or fans, which may create strong magnetic fields. · If possible, position the monitor so that it is facing the east to minimize the effects of the earth's magnetic field. · Changing the direction of the monitor while it is powered on may cause image discoloration. To correct this, turn the monitor off for 20 minutes before powering it back on. · The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet which is easily accessible. · Handle with care when transporting. Save packaging for transporting. Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: · · · · · When the power supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the monitor. If the monitor has been exposed to rain or water. If the monitor has been dropped or the cabinet damaged. If the monitor does not operate normally by following operating instructions. 8 78133441 10 6/24/98, 7:50 AM Recommended Use CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: · Adjust the monitor height so that the top of the screen is at or slightly below eye level. [. . . ] Consumers are cautioned that Product performance is affected by system configuration, software, the application, customer data, and operator control of the system, among other factors. While NECTECH Products are considered to be compatible with many systems, specific functional implementation by the customers of the Product may vary. Therefore, suitability of a Product for a specific purpose or application must be determined by consumer and is not warranted by NECTECH. For the name of your nearest authorized NECTECH service facility, contact NECTECH at 1-800-632-4662. 15 78133441 17 6/24/98, 7:50 AM Notes 78133441 18 6/24/98, 7:50 AM Notes 78133441 19 6/24/98, 7:50 AM NEC Multimedia Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others. [. . . ]