User manual NEC MT840-1040-1045

[. . . ] LCD Projector MultiSync MT840/MT1040/MT1045 User's Manual IMPORTANT INFORMATION Precautions Please read this manual carefully before using your NEC MultiSync MT840/MT1040/MT1045 Projector and keep the manual handy for future reference. Your serial number is located under the name plate label on the left side of your MultiSync MT840/MT1040/ MT1045. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. [. . . ] The power indicator will go out. CANCEL: Return to the previous screen without storing settings or adjustments. NOTE: You can close the main and sub menus simultaneously by pressing the Computer/Projector Select button to cancel the Projector mode. Repeat steps 2-5 to adjust an additional item, or press "Cancel" on the projector cabinet or the remote control to quit the menu display. Using a USB Mouse Using a USB mouse gives you a smooth operation. A commercially available USB mouse is required. NOTE:There may be some brands of USB mouse that the projector does not support. Operate the Menus using the USB mouse Mouse Cursor When connecting a USB mouse to the projector, you get a mouse cursor on the screen. Unless you use your USB mouse within 10 seconds, the mouse cursor disappears. Menu Display Clicking with a mouse button displays the main menu. To close the menu, click anywhere in the background. Adjusting and Setting Display You can select a menu item and click with a mouse button to make adjustments and setting. Examples Click (or press and hold) the mouse button or to adjust the brightness. Or click and drag the mouse button on the slide bar horizontally to adjust it. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point. IMPORTANT: · The projector should be unplugged if it will not to be used for an extended period. · To turn off the image and sound briefly (five minutes or less), use the "Picture Mute" button instead of turning the projector off and on. · The projector will display a black, blue image or logo if no input signal is present. · Do not turn the projector off and then immediately back on. The projector needs to cool for a minute before it can be restarted. After the projector turns off, the cooling fans keep operating for a full minute. Do not disconnect the power cable during this time. Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. Press the "Menu" button on the remote control or projector cabinet to display the Main Menu. NOTE: When using a USB mouse, click the mouse button to display the main menu. For other operations, do the same way as you use your PC mouse. E­17 MENU Tree Main Menu Mein Menu Source Select Adjustments Image Options Projector Options Tools Help Sub Menu Source Select RGB 1 RGB 2 Video S-Video PC Card Viewer Items Adjustable Sources Brightness* Contrast* Color* Hue* Sharpness* Auto Adjust** Position** Pixel Adjust** Resolution** All Data/Current Signal R, V, C R, V, C V, C V, C V R R R R Adjustments Picture Volume Image Color Temperature Keystone Factory Default Image Options Image Mode Video Mode R, V, C All All Aspect Ratio Gamma Noise Reduction Color Matrix Language Source Display Projector Pointer Orientation Background Signal Select Auto Start Power Management Power Off Confirmation Mouse Button Mouse Sensitivity Clear Lamp Hour Meter Keystone Save Fan High Speed Mode Remote Sensor S-Video Mode Select PC Card Viewer Options Capture Options Source Name Input Terminal Frequency FH Frequency FV Sync Polarity Signal Type Video Type Sync Type Interlace Resolution Aspect Ratio Gamma Noise Reduction Color Matrix Matrix Type Lamp Hour Meter V, C R, V, C V, C C Projector Options Menu Setup Tools Capture PC Card Files ChalkBoard Help Contents Source Information Projector Information NOTE: Adjustable sources R=RGB V=Video/S-Video C=Component All=All sources (including PC Card Viewer) E­18 Menu Elements Title bar Setup Page1 Page2 Page3 Page4 Orientation Signal Select RGB1 RGB2 Background Blue Video S-Video Auto Auto Auto Auto Tab Close button Highlight Solid triangle Front Floor OK Cancel Cancel Button OK Button Setup Page1 Page2 Page3 Page4 Check box Mouse Button Right Hand Auto Start Left Hand Slow Power Management Power Off Confirmation Keystone Save Clear Lamp Hour Mater Fan High Speed Mode Radio button Sensitivity Fast Medium OK Cancel Slide bar Brightness Menu windows or dialog box typically have the following elements: Title bar: Indicates the menu title. X Close button: Click to close the window with saving changes. [. . . ] See page E-13 · Use menus or Source button on the remote control or the cabinet to select the source you want to input. · · · · Install new batteries. Make sure there are no obstacles between you and the projector. Stand within 22 feet (7 m) of the projector. [. . . ]