User manual NEC MULTISYNC P1150

[. . . ] NEC Performance Series Information Guide Features . . . . . . . . . . . . . . . . . . . . . . . . . 9 78131622 1 7/29/98, 8:59 AM WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. [. . . ] Sides Left/Right (pincushion balance): Increases or decreases the curvature of the sides either to the left or right. Sides Tilt (parallelogram): Increases or decreases the tilt of the sides either to the left or right. Sides Align (trapezoidal): Increases or decreases the bottom of the screen to be the same as the top. Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise. 3 78131622 5 7/29/98, 8:59 AM Controls Tools 1 Language: OSMTM controls menus are available in 6 languages. OSM Position: You can choose where you would like the OSM controls image to appear on your screen. Selecting OSM Position allows you to manually adjust the OSM controls menu left, right, up or down. OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last touch of a button to shut off the OSM controls menu. The preset choices are 10, 20, 30, 60 120 seconds. OSM Lock Out: This control completely locks out access to all OSM controls functions. When attempting to activate OSM controls while in the lock out mode, a screen will appear indicating that OSM controls are locked out. To activate the OSM Lock Out function, press PROCEED, then and hold down simultaneously. To deactivate the OSM Lock Out, press PROCEED, then and hold down simultaneously. IPMTM System Off Mode: Enable: The IPM System works normally and all stages of energy savings are utilized. Disable: The Off Mode of the IPM System is not used. NOTE: For standard systems and graphics boards, keep the factory setting at ENABLE. Factory Preset: Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. A warning statement will appear to confirm that you do want to reset ALL settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. 4 78131622 6 7/29/98, 8:59 AM Controls Tools 2 Moire Canceler: Moire is a wavy pattern which can sometimes appear on the screen. The pattern is repetitive and superimposed as rippled images. When running certain applications, the wavy pattern is more evident than in others. To reduce moire, adjust the On/Level by using the +/- CONTROL buttons. Linearity: This selection allows you to adjust the spacing of the area on the screen. [. . . ] This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This warranty is limited to the original purchaser of the Product and is not transferable. This warranty covers only NECTECH-supplied components. Service required as a result of third party components is not covered under this warranty. [. . . ]