User manual NEC PLASMASYNC PX-42VP3A

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. [. . . ] [OFF] : No display of any menu screens or adjustment details. I OSD MODE [BASIC] : Allows only the first page of the main menu to be displayed. [PRO] : Allows Pages 1 and 2 of the main menu to be displayed. I WIRELESS REMOTE CONTROL [ON] : Enables remote control wireless transmission. [OFF] : Disables remote control wireless transmission. Set [OFF] to avoid unwanted control from other remote controls. I SYNC MODE [AUTO] : Automatically detects separate sync signals, green sync signal (i. e. , sync-on-green), and composite sync signal. [GSYNC] : Automatically detects green sync signal (i. e. , sync-on-green). [CSYNC] : Automatically detects composite sync signal. I PLE LINK [ON] : Sets a uniform screen brightness for each screen in a 4-screen multiple system. [OFF] : Sets the screen brightness for each of the screens in a 4-screen or multiple system to their respective brightness. * Set [OFF] in a 9-screen multiple system. * When this function is set [ON], connect four plasma monitors with the remote control cable (included with the optional remote control) in the order of the position numbers for 4-screen multiple system. See the drawing below. REMOTE IN Move the cursor up and down with the POSITION/CONTROL LM buttons. 2 Adjust with the POSITION/CONTROL buttons CONFIG MENU OSD DISPLAY :KEY OSD MODE :BASIC WIRELESS REMOTE CONTROL :ON SYNC MODE :AUTO PLE LINK :OFF ALL RESET 3 Press the EXIT button 2 times Press the EXIT button one time to return to the config menu. One further press removes the menu. No. 1 No. 2 No. 4 No. 3 REMOTE OUT REMOTE IN No. 1 No. 2 No. 4 No. 3 REMOTE OUT Monitor REMOTE OUT REMOTE IN Monitor REMOTE OUT No. 1 No. 2 No. 4 No. 3 No. 1 No. 2 No. 4 No. 3 REMOTE IN Monitor Monitor Note: Please use the control panel of the main unit at this time since operation with the remote control will not be enabled with this arrangement. I ALL RESET Align the cursor and then press the PROCEED button to return all adjustments and settings of CONFIG MENU to the factory default values. 26 PLASMA MONITOR Audio Settings (SOUND) This menu sets the volume, balance, mute, and selection of input. Note that only sound of the currently displayed signal is output. Preparation Press the PROCEED button to display the main menu. 1 Align the cursor with Adjustment Screen [VOLUME] : Adjusts the volume VOLUME BALANCE MUTE INPUT1 INPUT2 : OFF : VIDEO : RGB1 Move the cursor left and right with the POSITION/CONTROL buttons. Decrease Increase [BALANCE] : Adjusts the left and right volume balance. L R L R Left side becomes stronger Right side becomes stronger [MUTE] 2 Align the cursor with the desired item : Switches off the sound (temporarily) [OFF] : There is sound. [ON] : Sound is switched off. Move the cursor up and down with the POSITION/CONTROL LM buttons. VOLUME BALANCE MUTE INPUT1 INPUT2 [INPUT 1] : Each press serves to advance the audio input of AUDIO IN 1 by one step. VIDEO : OFF : VIDEO : RGB1 RGB 1 RGB 2 or DVD/HD RGB 3 [INPUT 2] : Each press serves to advance the audio input of AUDIO IN 2 by one step. RGB 1 RGB 2 or DVD/HD VIDEO RGB 3 3 Adjust with the POSITION/CONTROL buttons VOLUME BALANCE MUTE INPUT1 INPUT2 : OFF : VIDEO : RGB1 Note: Adjustments of [VOLUME], [BALANCE], [MUTE] will be stored in memory for each input (VIDEO, RGB 1-3, DVD/HD, and SCART). To change these settings, first display the source of which audio input you wish to adjust. 4 Press the EXIT button 2 times Press the EXIT button one time to return to the main menu. One further press removes the menu. PLASMA MONITOR 27 Picture Adjustments (VISUAL CONTROL) This menu adjusts the brightness, contrast, sharpness, color, and tint. Preparation Press the PROCEED button to display the main menu. 1 Align the cursor with Adjustment Screen [BRIGHTNESS]: Adjusts the brightness of the screen. BRIGHTNESS CONTRAST SHARPNESS COLOR TINT Move the cursor left and right with the POSITION/CONTROL buttons. Darker Brighter [CONTRAST] : Adjusts the contrast of the image. Fainter Denser [SHARPNESS] : Adjusts the sharpness of the image. 2 Align the cursor with the desired item Softer More distinct Move the cursor up and down with the POSITION/CONTROL LM buttons. [COLOR] BRIGHTNESS CONTRAST SHARPNESS COLOR TINT : Adjusts the color saturation Less saturated More saturated [TINT] : Adjusts the tint. Tinted toward red Tinted toward green 3 Adjust with the POSITION/CONTROL buttons BRIGHTNESS CONTRAST SHARPNESS COLOR TINT * These adjustments will not be available when the color system setting is set to [PAL] or [SECAM]. 4 Press the EXIT button 2 times Press the EXIT button one time to return to the main menu. One further press removes the menu. Note: Only the [BRIGHTNESS] and [CONTRAST] adjustments are available with the RGB input screen. 28 PLASMA MONITOR Auto Picture/Wide Screen Settings (AUTO PICTURE) Clock Frequency/Clock Phase Adjustment, and RGB Mode Adjustment (AUTO PICTURE) There is normally no need to adjust the clock frequency or clock phase when [AUTO PICTURE] is set to [ON]; however, when automatic adjustment cannot adjust the picture properly, a manual adjustment should be made. Make an adjustment when a signal is newly input, and when vertical lines appear and the image appears blurred. Preparation Press the PROCEED button to display the main menu. 1 Align the cursor with 5 AUTO PICTURE INPUT MODE RGB MODE : ON : 4X3 : STILL WIDE MODE : FULL Adjust with the POSITION/CONTROL buttons Move the cursor left and right with the POSITION/CONTROL buttons. : Sets the mode (i. e. , moving picture/still picture mode) to suit the input signal [PICTURE ADJ] : Adjusts the clock frequency [FINE PICTURE] : Adjusts the clock phase [RGB MODE] 6 2 Align the cursor with AUTO PICTURE Move the cursor up and down with the POSITION/CONTROL LM buttons. Press the EXIT button 2 times Press the EXIT button one time to return to the main menu. One further press removes the menu. AUTO PICTURE INPUT MODE RGB MODE : ON : 4X3 : STILL WIDE MODE : FULL Note: I AUTO PICTURE Adjustment of [H-POSITION] and [V-POSITION] is not available when [AUTO PICTURE] is set to [ON] at the time of RGB signal input. [. . . ] · Are the remote control's batteries worn out?· The front panel buttons of the main unit do not function · Is the monitor's power cord plugged into a power outlet? No Sound or Picture is produced. · Power outlet inactive. External equipment has been incorrecty connected. · Is the volume set at the minimum? [. . . ]