User manual NEC PLASMASYNC PX-50MP2

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. [. . . ] Turns the noise reduction function off. : MEMORY :2 : OFF EXIT RETURN 3. Use the and buttons to select "NR-3". The mode switches as follows when the and buttons are pressed: OFF NR-1 NR-2 NR-3 NR : NR-3 * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 24 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "SOUND", then press the PROCEED button. Use the L and M buttons to select "BASS". SOUND BASS TREBLE BALANCE L R To continue adjusting the sound . . . Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Note : If "CAN NOT ADJUST" appears. . . Set "AUDIO INPUT" on the OPTION menu correctly. Information Sound settings menu BASS . . . . . . . . . . . . . . Changes the level of low frequency sound. Changes the level of high frequency sound. Changes the balance of the left and right channels. Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. SEL. ADJ. EXIT RETURN 3. Adjust the bass using the and buttons. SOUND BASS TREBLE BALANCE L R SEL. ADJ. EXIT RETURN * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 25 Screen Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "SCREEN", then press the PROCEED button. Default settings (when RGB/PC is selected) SCREEN : NORMAL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. Adjust using the and buttons. V­POSITION * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To continue making other computer image adjustments . . . Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information When "AUTO PICTURE" is "OFF" SCREEN : FULL MODE V­POSITION H­POSITION V­HEIGHT H­WIDTH : OFF AUTO PICTURE FINE PICTURE PICTURE ADJ. SEL. EXIT RETURN * The settings on the SCREEN menu are not preset at the factory. [. . . ] Incorrect 15 PIN connector pin connections. · Are the tint and colors properly adjusted?· Is the computer's power turned on?· Is the power management function in the standby or off mode? [. . . ]