User manual NEC POWERMATE VE 03-1996

[. . . ] PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data, and operator control. [. . . ] This area provides a summary of Main Menu Setup parameters. You can set some Main Menu parameters directly from this window or you can set them from the Main menu option in the legend bar. s The Field Help window or Item Specific Help -- the area on the right side of the screen. This help area provides help information for the Setup option currently selected. s The legend bar -- the area at the bottom of the screen. The legend bar provides a summary of command keys for using Setup. s The General Help window -- a window that appears any time during Setup when you press F1 or Alt H. This help window provides two pages of general information about using Setup. The following sections describe how to use the Main Menu window to set system parameters. 4-4 Setting System Parameters The Menu Bar The menu bar at the top of the Main Menu window lists these menus: s Main -- Use this menu for basic system configuration. For example, select "Main" to set the system time, system date, diskette drives, and video parameters. Use this menu to check memory parameters. s Advanced -- Use this menu to set serial port and printer port addresses and interrupts, and to enable/disable the system's diskette drive controller and dual-IDE controllers. The Advanced menu also provides menu items for setting parity and for setting parameters for large disks (for example, to use large disks with Windows NTTM). Some of the Advanced features are accessible only with a Supervisor password when the Supervisor password is set. s Security -- Use this menu to set User and Supervisor Passwords and the Backup and Virus-check reminders. s Power -- Use this menu to configure Power Management features. s Exit -- Use this menu to exit the current menu. To select an option from the menu bar, use the left and right arrow keys. See "Exiting Setup" in this chapter for a description on exiting the Main Menu. Setting System Parameters 4-5 The Legend Bar Use the keys listed in the legend bar on the bottom of the Setup menu to make your selections or exit the current menu. The following table describes the legend keys and their alternates. Setup Key Functions KEY F1 or Alt-H Esc or arrow keys or arrow keys Tab or Shift-Tab Home or End Page Up or Page Down F5 or F6 or + or Space F9 F10 Enter Alt-R FUNCTION Displays the General Help window (described later in this chapter). Moves the cursor up and down for item selection. Cycles the cursor up and down for item selection. Moves the cursor to the top or bottom of the window. Moves the cursor to the next or previous page. Selects the Previous Value for the field. Loads the Default Configuration values for this menu. Loads the Previous Configuration values for this menu. Executes a command or selects a submenu. Refreshes the screen. 4-6 Setting System Parameters Selecting a Menu Item To select a menu item, use the arrow keys to move the cursor to the field you want. Then use the value keys (F5, -, F6, +, or space bar) to cycle through the value for that field. The Save Values command in the Exit Menu saves the values currently displayed in all the menus. Displaying a Submenu To display a submenu, use the arrow keys to move the cursor to the submenu you want. A pointer (a right-pointing triangle) marks all selectable submenus. [. . . ] NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]