User manual NEC PX-42VR5A Operation Manual

[. . . ] Operation Manual For the specifications of your plasma monitor, refer to "Model Information". NEC Solutions (America), Inc. Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Do not use this unit's polarized plug with extension cords or outlets unless the prongs can be completely inserted. Do not expose the unit to water or moisture. Avoid damage to the power cord, and do not attempt to modify the power cord. [. . . ] : 2. 2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL COLOR TUNE : ON CINEMA MODE : NORMAL PICTURE MODE SEL. Adjust the level or change the setting of the selected item by using the cursor buttons on the remote control. CONTRAST 10 5. The adjustments or the settings that are stored in memory. The change is stored until you change it again. Repeat steps 2 ­ 5 to adjust an additional item, or press the EXIT button on the remote control to return to the main menu. * When adjusting using the bar at the bottom of the screen, press the or button within 5 seconds. If not, the current setting is set and the previous screen appears. Note: The main menu disappears by pressing the EXIT button. 14 Menu Tree :Shaded areas indicate the default value. The default value is at the center. Main menu PICTURE Sub menu PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR TINT NR COLOR TEMP. WHITE BALANCE Sub menu 2 Sub menu 3 Sub menu 4 RESET YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES RESET YES YES YES YES YES YES REFERENCE 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 19 19 19 19 19 19 19 19 19 19 REFERENCE 20 20 20 20 20 20 OFF/MEMORY1-6 05272 03264 01632 03264 RG 03264 OFF/NR-1/NR-2/NR-3 LOW/MIDDLE LOW/MIDDLE/HIGH GAIN RED 070 GAIN GREEN 070 GAIN BLUE 070 BIAS RED 070 BIAS GREEN 070 BIAS BLUE 070 RESET OFFON 2. 12. 22. 32. 4 AUTO1. . . 3 0%3. 75%7. 5% RED YM 064 GREEN CY 064 BLUE MC 064 YELLOW GR 064 MAGENTA RB 064 CYAN BG 064 RESET OFFON ONOFF DEFAULT/THEATER1/THEATER2/NORMAL/BRIGHT Sub menu 2 Sub menu 3 Sub menu 4 GAMMA LOW TONE SET UP LEVEL COLOR TUNE CINEMA MODE PICTURE MODE Main menu AUDIO Sub menu BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 01326 01326 LR -220+22 VIDEO 1-3 / HD/DVD 1-3 / RGB 1-3 VIDEO 1-3 / HD/DVD 1-3 / RGB 1-3 VIDEO 1-3 / HD/DVD 1-3 / RGB 1-3 Main menu IMAGE ADJUST Sub menu ASPECT MODE V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE FINE PICTURE*1 PICTURE ADJ. *1 Sub menu 2 Sub menu 3 Sub menu 4 RESET NO YES YES YES YES NO YES YES REFERENCE 20 20 20 20 20 20 20 20 ZOOM/NORMAL/ANAMORPHIC/STADIUM/14:9/2. 35:1 -640+64 -1280+127 064 064 ONOFF*2 *2 064 *2 0128 Sub menu 2 Sub menu 3 Sub menu 4 Main menu SET UP Sub menu LANGUAGE BNC INPUT D-SUB INPUT HD SELECT RGB SELECT DVI SET UP COLOR SYSTEM BACK GROUND GRAY LEVEL S1/S2 DISPLAY OSM OSM ADJ. ALL RESET RESET NO YES YES NO YES NO NO NO YES YES YES YES YES -- REFERENCE 21 21 21 21 21 22 22 22 22 23 23 23 23 23 ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO/SVENSKA/ / RGBCOMPONENT RGB 1080I/1035I/540P AUTO/STILL/MOTION/WIDE1/WIDE2/WIDE3/DTV PLUG/PLAY PCSTB/DVD BLACK LEVEL LOWHIGH AUTO/PAL/PAL-M/PAL-N/PAL 60/SECAM/4. 43 NTSC/3. 58NTSC BLACK/GRAY 0. . . 3. . . 15 AUTOOFF ONOFF TOP LEFTTOP CENTERTOP RIGHTBTM LEFTBTM CENTERBTM RIGHT ONOFF 15 Main menu FUNCTION Sub menu POWER MGT. INPUT SKIP PDP SAVER Sub menu 2 Sub menu 3 Sub menu 4 RESET YES YES YES YES YES YES YES YES YES YES YES YES REFERENCE 24 24 24 25 25 25 25 25 26 26 26 26 CLOSED CAPTION CAPTION CONT ONOFF ONOFF MANUAL/AUTO PEAK BRIGHT 100%/75%/50%/25% ORBITER OFF/AUTO1/AUTO2 INVERSE/WHITE OFF/INVERSE/WHITE SCREEN WIPER ON/OFF SOFT FOCUS OFF/LEVEL1-4 OSM ORBITER ON/OFF OSM CONTRAST LOW/NORMAL OFF/CAPTION1-4/TEXT1-4 LOW/NORMAL Main menu SIGNAL INFO. Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET -- REFERENCE 26 *1 Only when AUTO PICTURE is OFF. *2 RGB/PC only Information Restoring the factory default settings Select "ALL RESET" under the SET UP menu. Note that this also restores other settings to the factory defaults. 16 Picture Settings Menu Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary. There are six picture memories, and notes of up to 15 characters can be added to each. Example: Storing picture settings at MEMORY1 On "PICTURE MEMORY" of "PICTURE" menu, select "MEMORY1", then press the MENU/ENTER button. The "PICTURE MEMORY" screen appears. PICTURE MEMORY MEMORY1 SET INPUT : DVD/HD1 SIGNAL : 480P NOTE : DVD/STAR WARS MEMORY2 INPUT : -- SIGNAL : -- NOTE : -- MEMORY3 INPUT : -- SIGNAL : -- NOTE : -- NEXT PAGE SEL. 1/2 RESET PICTURE MEMORY PREVIOUS PAGE MEMORY4 SET INPUT : -- SIGNAL : -- NOTE : -- MEMORY5 INPUT : -- SIGNAL : -- NOTE : -- MEMORY6 INPUT : -- SIGNAL : -- NOTE : -- SEL. MENU/ENTER OK 2/2 RESET Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast On "CONTRAST" of "PICTURE" menu, adjust the contrast. PICTURE : OFF PICTURE MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR R TINT : OFF NR : MIDDLE COLOR TEMP. : 2. 2 GAMMA : AUTO LOW TONE : 0% SET UP LEVEL COLOR TUNE : ON CINEMA MODE : NORMAL PICTURE MODE SEL. EXIT RETURN G CONTRAST 10 Note: If "CAN NOT ADJUST" appears . . . When trying to enter the PICTURE submenu, make sure PICTURE MODE is not set to DEFAULT. [. . . ] Repair or attempted repair by anyone not authorized by NEC Solutions. Any shipment of the product (claims must be presented to the carrier). Any other cause which does not relate to a product defect. Burns or residual images upon the phosphor of the panel. [. . . ]