User manual NEC READY ES PRO

[. . . ] Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computer Systems Division, Packard Bell NEC (NECCSD, PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NECCSD product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data, and operator control. [. . . ] See the following sections to: T locate the external connectors on your computer T connect an NEC CS500TM monitor T connect an NEC C700TM monitor T connect a printer. External options 59 Locating external connectors Connectors on the back of your Ready computer let you add a variety of popular industry-standard options. Depending on system configuration, your system has either a fax/modem/sound board (modem configuration) or a Ethernet network board and graphics board (Ethernet configuration). See the following figures to locate the connector for your device. For a description of the devices each connector supports, go to "System Tour" in your NEC Help Center. Then choose "A Closer Look at the Parts" and "Looking at the Back. " Locating your external device connectors (modem configurations) 60 External options Locating your modem and audio connectors (modem configurations) External options 61 Locating your external device connectors (Ethernet configurations) 62 External options Locating your graphics board connectors (Ethernet configurations) Locating your audio connectors (Ethernet configurations) External options 63 Connecting an NEC CS500 monitor Some systems ship with the NEC CS500 monitor. The monitor integrates in one cabinet an NEC color monitor, two amplified speakers, and a microphone. If your system comes with the NEC CS500 monitor, use the following steps to connect the monitor to the back of your system unit. Also see the documentation that comes with the monitor. 1. Turn off and unplug the system unit and any external options connected to the system unit. 2. Locate the signal cable connector, microphone connector, and speaker connector on the monitor cable. Identifying the NEC CS500 monitor cable connectors 64 External options 3. Connect the monitor signal cable to the VGA monitor connector on the back of your system unit. Secure the connector with the screws provided. Note: The location of the monitor connector and audio connectors on the back of the system unit vary, depending on system configuration. See the preceding figures for the location of the connectors. 4. Connect the microphone cable to the microphone in jack. Connect the speaker cable connector to the line out jack. Connect one end of the power cable to the monitor and the other end to a properly grounded power outlet. Connecting the NEC CS500 monitor power cable External options 65 7. Reconnect the system unit power cable and any external option power cables to the system unit. 8. Press the power button on the front of the monitor. Press the power button on the front of the system unit. See the monitor's documentation for further information on using the monitor with your system. Connecting an NEC C700 monitor Some systems ship with an NEC C700 monitor, without speakers and microphone. You might want to add optional speakers and an optional microphone. Follow these general steps to connect the monitor and any optional components. Also see the documentation that comes with the units for detailed connection information. The location of the monitor connector and audio connectors on the back of the system unit vary, depending on system configuration. [. . . ] Surround sound, also called SRS 3D sound, is a Sound Retrieval System®. The system creates a three-dimensional sound image with only two conventional speakers. Using pre-recorded music, the system retrieves the spatial information and restores the original three-dimensional sound field. The reproduced sound is much closer to a live performance. System specifications 99 The MIDI interface provides a musical instrument digital interface and connector for the connection of a digital musical instrument. [. . . ]