User manual NEC RS232 PLASMA CONTROL CODES COMMERCIAL MODELS

[. . . ] NEC plasma display External Control Manual (for PX-42VP5/42XM5/42XM3/50XM4/61XM3) Application These specifications are applicable to NEC plasma monitors and communications control from external equipment. "Please also support the command of VP series and refer to the manual of the conventional model about specification. " Connections Connections should be made as described below. plasma monitor External equipment e. g. , Personal computer 1) Connector on the plasma monitor side: EXTERNAL CONTROL connector. Type of connector: D-Sub 9-pin male No. Pin Name 1 2 3 4 5 6 7 8 9 No Connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 2 2) Connector on the external equipment side: Serial port (RS-232C) connector. See the specifications of the equipment that is to be connected for the type of connector and the pin assignment. [. . . ] INVERSE Set Function The external control equipment sets the INVERSE (inverse of image brightness) and the WHITE of the plasma monitor. Transmission Data DFH 80H 60H C7H 03H DATA00 DATA01 DATA02 CKS DATA00: INVERSE/WHITE 00H : No operation 01H : ON (INVERSE) 02H : OFF 03H : WHITE DATA01 : WORKING TIME 00H : ON 01H: 03M (minutes) 02H: 06M (minutes) : FFH: 12H (hours) and 45M (minutes) DATA02 : WAITING TIME 01H: 03M (minutes) 02H: 06M (minutes) : FFH: 12H (hours) and 45M (minutes) ACK 3FH 60H 80H C7H 00H CKS NOTE: The WORKING TIME and the WAITING TIME can be set in units of 3 minutes. Example: 03H=9 minutes 1EH=1 hour and 30 minutes 31 36. SCREEN WIPER Set Function The external control equipment sets the SCREEN WIPER of the plasma monitor. Transmission Data DFH 80H 60H C8H 04H DATA00 to DATA03 CKS DATA00 : SCREEN WIPER 00H : No operation 01H : ON 02H : OFF DATA01 : WORKING TIME 00H : ON 01H: 03M (minutes) 02H: 06M (minutes) : FFH: 12H (hours) and 45M (minutes) DATA02 : WAITING TIME 01H: 03M (minutes) 02H: 06M (minutes) : FFH: 12H (hours) and 45M (minutes) DATA03 : SPEED 01H : 1 : 05H : 5 ACK 3FH 60H 80H C8H 00H CKS NOTE: The WORKING TIME and the WAITING TIME can be set in units of 3 minutes. Example: 03H=9 minutes 1EH=1 hour and 30 minutes 32 37. ALL RESET Function The external control equipment resets the user adjustment of the plasma monitor. Transmission Data 1FH 80H 60H 54H 00H CKS ACK 3FH 60H 80H 54H 00H CKS 38. Audio Select Set Function The external control equipment sets combinations of audio and video inputs for the plasma monitor. Transmission Data DFH 80H 60H 70H 02H DATA00 DATA00 : AUDIO INPUT DATA01 CKS 01H : AUDIO1 02H : AUDIO2 03H : AUDIO3 DATA01 : VISUAL INPUT 01H : VIDEO1 02H : VIDEO2 03H : VIDEO3 05H : HD(HD1orDTVorDTV1) 06H : HD2(DTV2) 07H : RGB1/PC1 08H : RGB2/PC2 0CH : RGB3/PC3 0DH : HD3(SCART3) ACK The plasma monitor returns the following ACK when the input is switched. 3FH 60H 80H 70H 00H CKS * The plasma monitor returns "Not Available" when selecting the video input same as the one set at one of the AUDIO 1 to 3. Example: The plasma monitor returns "Not Available" when selecting the VIDEO1 for AUDIO2 or VIDEO3 after VIDEO1 has been set to AUDIO1. 33 39. BNC INPUT Function The external control equipment sets the BNC SELECT of the plasma monitor. Transmission Data DFH 80H 60H 8CH 01H DATA00 CKS DATA00 : BNC SELECT 01H : RGB 02H : Component 04H : SCART1(*:Only Europe can be chosen. ) 05H : SCART2(*:Only Europe can be chosen. ) ACK The plasma monitor returns the following ACK when setting the BNC SELECT: 7FH 60H 80H 8CH 01H DATA00 CKS DATA00 : BNC SELECT 01H : RGB 02H : Component 04H : SCART1(*:Only Europe can be chosen. ) 05H : SCART2(*:Only Europe can be chosen. ) 40. RGB Select Function The external control equipment sets the RGB SELECT of the plasma monitor. Transmission Data DFH 80H DATA00 60H 8BH 01H DATA00 CKS 01H : AUTO 02H : STILL 03H : MOTION 04H : WIDE1 05H : WIDE2 06H : DTV 07H : WIDE3 08H : WIDE4 ACK 7FH 60H DATA00 80H 8BH 01H DATA00 CKS 01H : AUTO 02H : STILL 03H : MOTION 04H : WIDE1 34 05H : WIDE2 06H : DTV 07H : WIDE3 08H : WIDE4 41. HD Select Function The external control equipment sets the HD SELECT of the plasma monitor. Transmission Data DFH 80H 60H 8AH 01H DATA00 DATA00 01H : 1035I 02H : 1080A 03H : 1080B ACK CKS 7FH 60H DATA00 80H 8AH 01H DATA00 CKS 01H : 1035I 02H : 1080A 03H : 1080B 42. LANGUAGE Select Function The external control equipment sets the LANGUAGE SELECT of the plasma monitor. Transmission Data DFH 80H 60H 5BH 01H DATA00 DATA00: 01H : ENGLISH 02H : GERMAN 03H : FRENCH 04H : SPANISH 05H : ITALIAN 06H : SWEDISH 07H : JAPANESE 0AH : CHINESE 0BH·F RUSSIAN ACK CKS 35 7FH 60H 80H 5BH 01H DATA00 DATA00: 01H : ENGLISH 02H : GERMAN 03H : FRENCH 04H : SPANISH 05H : ITALIAN 06H : SWEDISH 07H : JAPANESE 0AH : CHINESE 0BH·F RUSSIAN CKS NOTE: As for the change to JAPANESE (07H), SHIP needs to be set as "J. " When SHIP is "J", a setup of CHINESE (0AH) cannot be performed. 43. COLOR SYSTEM Select Function The external control equipment sets the COLOR SYSTEM of the plasma monitor. Transmission Data DFH 80H 60H 5CH 01H DATA00 DATA00: 01H : 3. 58NTSC 02H : 4. 43NTSC 03H : PAL 04H : SECAM 0AH : AUTO 0BH : PAL60 0DH : PAL-M 0EH : PAL-N ACK CKS 7FH 60H 80H 5CH 01H DATA00 DATA00: 01H : 3. 58NTSC 02H : 4. 43NTSC 03H : PAL 04H : SECAM 0AH : AUTO CKS 36 0BH : PAL60 0DH : PAL-M 0EH : PAL-N 44. FREQUENCY Request Function The external control equipment inquires the Horizontal frequency, Vertical frequency, Horizontal sync polarity, Vertical sync polarity, Mode, and Resolution of the plasma monitor. [. . . ] PICTURE Size Function Screen mode selection. Transmission Data DFH 80H 60H 2AH 01H DATA00 DATA00 01H : ON 02H : OFF ACK CKS 7FH 60H 80H 2AH 01H DATA00 DATA00 01H : ON 02H : OFF CKS *This function is only 50 or 61 inch model. 70. OPTION Select Function Power-on mode, a control lock, and IR remote are set up. Transmission Data DFH 80H 60H 63H 04H DATA00 to DATA03 00H : LAST 01H : Video1 02H : Video2 03H : Video3 CKS DATA00 : Power ON mode 05H : HD (HD1 or DTV or DTV1) 06H: HD2 (DTV2 or SCART1/SCART2) 07H : RGB1 / PC1 08H : RGB2 / PC2 0CH : RGB3 / PC3 0DH : HD3(SCART3) DATA01 : Control Lock DATA02 : IR remote DATA03 : Loop Out ACK 00H : OFF 01H : ON 00H : OFF 01H : ON 00H : OFF 01H : ON 7FH 60H 80H 63H 00H CKS 63 71. REPEAT Timer Function External control apparatus sets up the repeat timer of a plasma monitor. [. . . ]