User manual NEC VERSA LXI VERSABAY III DVD-ROM DRIVE

[. . . ] Safety specifications for the NEC VersaBay III DVD-ROM drive (page 7). !! NEC VersaBay III DVD-ROM Drive Features The NEC VersaBay III DVD-ROM drive offers the features shown in the following figure. NEC VersaBay III DVD-ROM drive features A - Release Button B - Emergency Eject Hole C - Status LED These features offer the following functions: ! Release Button -- ejects the CD tray. Press this button when the power is on to insert a CD into or remove a CD from the drive. Emergency Eject Hole -- allows you to manually remove a CD or videodisc from the NEC VersaBay III DVD-ROM drive if the eject function is disabled by software or a power failure. [. . . ] 9. Slide the release lock to the locked position. Turn the system over, open the LCD panel, and power on the system. You are ready to install the NEC SoftDVD Player software. See the next section. Installing the NEC SoftDVD Player The NEC SoftDVD Player, which allows you to play DVD movies, is provided on the "NEC SoftDVD for NEC Versa LXi notebook computers" CD included with your DVD-ROM drive. Once you have installed the VersaBay III DVD-ROM drive, install the SoftDVD Player according to the following steps. NEC Versa LXi VersaBay III DVD-ROM Drive 3 Note For Windows 95 systems, this NEC SoftDVD Player Setup program installs DirectX Media, Internet Explorer 5. 0, and DVD Player (this sequence is required). For Windows 98 systems, the Setup program installs DVD Player. 2. Insert the NEC SoftDVD Player CD in the DVD-ROM drive or CD-ROM drive. If you have auto-insert notification enabled, the installation program should launch automatically. If you do not have auto-insert notification enabled, click the Start button and select Run. Browse for the drive letter representing the drive containing the CD, and double click Setup. 3. 6. The Welcome to NEC SoftDVD Player Setup window appears. Click Yes to accept the license agreement. The Installation Instructions on NEC SoftDVD Player Setup window appears. If you are reinstalling the NEC SoftDVD Player, a box appears asking, "Would you like to install or reinstall NEC SoftDVD Player Setup?" Click Yes. (If this is the first time you are installing the software, this box does not appear. ) To continue with the installation !! 7. for Windows 95 systems, proceed to the step 8 for Windows 98 Second Edition systems, skip to step 12. 8. 9. An Information box appears notifying you that the program is about to install DirectX Media, Internet Explorer 5. 0, and DVD Player. The Setup window reappears briefly while the DirectX Media software is installed. Then the Windows Update: Internet Explorer and Internet Tools window appears for the Internet Explorer installation. Select "I accept the agreement" and click Next. 10. In the next window, select "Install Now ­ Typical set of components" and click Next. The Progress window appears while the install proceeds. (This does not restart the computer. ) Note When you click Finish, the computer does not restart. [. . . ] For detailed information on power management, see your NEC Versa LXi User's Guide. AC Power Management Settings for Windows 95 The BIOS in your system is factory-set with the correct AC power management settings for playing DVD movies with the NEC SoftDVD Player. If you have altered the factory-shipped AC power management settings in BIOS, change them back before playing a movie with the NEC SoftDVD Player. In BIOS, under the power management Setup menu, set Power Management for AC to Off for playing movies. For complete information on changing BIOS settings, see your NEC Versa LXi User's Guide. AC Power Management Settings for Windows 98 The appropriate AC power management values are automatically set when you install the NEC SoftDVD Player for playing DVD movies. [. . . ]