User manual NEC VERSA ULTRALITE

[. . . ] Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Computers Inc. (hereinafter "NEC Computers") and/or its licensors. NEC Computers and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly granted to others. The NEC Computers product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. [. . . ] If you decline the agreement, the recovery utility exits. 5. In the NEC Product Recovery Utility screen, use the VersaGlide touchpad to choose Partition Only to restore drive C: of a multiple partitioned drive to its original factory installed state. Choose your restore option carefully to prevent losing data and applications installed on your system. If the hard disk is configured with multiple or extended partitions you may have to reinstall some software to restore configuration settings and shared files. A warning displays indicating that drive C: (the primary drive/partition) is about to be erased and formatted. It may be necessary to reinstall software to the other drives (partitions) to reestablish Start Menu links and other configuration requirements stored on drive C:. 7. Select Continue to proceed, to perform a Partition Only restore. If you select Back, the recovery utility returns to the prior screen which has an exit option. If you select Continue, a screen with progress bars displays and lets you know the progress of the recovery. Do not turn off or disturb the system during the recovery process. 4-8 Using the Operating System and Utilities 8. 9. When the recovery process is complete, you are prompted to remove the CD from the CD-ROM drive and reboot your system. Press Enter, click Reboot, or press Alt-R to reboot your system. A series of hardware detection screens display, the system reboots, and the Windows Setup screen appears. Follow the on-screen instructions to set up Windows. You are required to reenter your Microsoft license number. Using the Operating System and Utilities 4-9 5 Using the System Drives and Bays !! External Floppy Diskette Drive External Variable-Speed CD-ROM Drive Hard Disk Drive Memory Modules External Floppy Diskette Drive The NEC Versa notebook ships with a standard 3. 5-inch, 1. 44-MB external floppy diskette drive and cable. Use the floppy diskette drive to install applications, create a BIOS update diskette, or simply copy files to and from your NEC Versa notebook computer. Connect the drive to one of the USB ports. When connected, the floppy diskette drive is assigned the letter a:. The external floppy diskette drive offers the following features, which are described after the figure. External floppy diskette drive and cable A ­ Status LED B ­ Floppy Diskette Drive Bay C ­ Eject Button !! D ­ Floppy Diskette Drive E ­ Floppy Diskette Drive Cable F ­ USB Port Connector Status LED -- Lights to indicate drive activity. Floppy Diskette Drive -- Use the cable provided to attach this drive to your system. Eject Button -- Press this button to eject/remove a diskette from the floppy diskette drive. Floppy Diskette Drive Bay -- Insert your floppy diskettes in this bay. Floppy Diskette Drive Cable -- Use this cable to connect the floppy diskette drive to your NEC Versa notebook system. USB Port Connector -- Attach the large end of the connector to the USB port on the left side of your system. ! [. . . ] Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]