User manual NEC VERSABAY IV DRIVE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NEC VERSABAY IV DRIVE. We hope that this NEC VERSABAY IV DRIVE user guide will be useful to you.

Lastmanuals help download the user guide NEC VERSABAY IV DRIVE.

Download

Manual abstract: user guide NEC VERSABAY IV DRIVE

Detailed instructions for use are in the User's Guide.

 [. . . ] NEC Versa

VersaBay IV Drive
Congratulations on purchasing an NEC® VersaBayTM IV drive for your NEC Versa® notebook computer!Use this document if you have one of the following VersaBay IV drives:
! [. . . ] Do not eject the CD or turn off the NEC Versa notebook when the indicator is lit. 

!

Removing a Device from the VersaBay IV Slot
Before installing your new NEC VersaBay IV drive,  remove any device or the weight-saving module (if in place) from the VersaBay IV slot as follows. 
1. 

If a VersaBay IV device is in the slot,  use the Phoenix® BaySwapTM utility or power off the system. (See your printed user's guide for information about the Phoenix BaySwap utility. ) If a VersaBay IV weight-saving module is in the VersaBay IV slot,  skip to step 2. 

If you plan to hot swap a VersaBay IV battery and the system is not connected to an AC power source,  verify that the primary battery is not in a low-power state. If it is,  plug in the system before removing the VersaBay IV battery. 4. 

Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Then press the latch into the system to eject the device. Pull the device out of the system. 

Removing a device from the VersaBay IV slot

Always install the weight-saving module in the VersaBay IV slot if you don't install a VersaBay IV device. The weight-saving module shipped with your system. 

2 NEC VersaBay IV Drive

Installing the Drive in the NEC VersaBay IV Slot
Use the following steps to install your new VersaBay IV device in the VersaBay IV slot. 
1. 

If you need to remove a device from the VersaBay IV slot,  see "Removing a Device from the VersaBay IV Slot, " earlier in this document. For information on hot swapping or warm swapping devices,  see the information about the Phoenix BaySwap utility in your printed user's guide. 

2. 4. 

Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Align the drive in the NEC VersaBay IV slot and push it in until it fits securely into the bay. 

Inserting an NEC VersaBay IV drive

5. 6. 

Press the latch back to the locked position. Press the Power button to power on or resume operation. 

NEC VersaBay IV Drive

3

Further Information
See the printed NEC Versa user's guide for further information about:
! [. . . ] All other trademarks and registered trademarks are the property of their respective owners. ©2001 NEC Computers Inc. 

819-200744-000 04/2001

*819-200744-000*
4 NEC VersaBay IV Drive [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NEC VERSABAY IV DRIVE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NEC VERSABAY IV DRIVE will begin.