User manual NEC VT580

[. . . ] Portable Projector VT580/VT480/VT58/VT48 User's Manual © NEC Viewtechnology, Ltd. 2005 First edition October 2005 · IBM is a trademark or registered trademark of International Business Machines Corporation. · Macintosh, Mac OS X and PowerBook are trademarks of Apple Computer, Inc. , registered in the U. S. · Windows, Windows 98, Windows Me, Windows XP or Windows 2000 are trademarks or registered trademarks of Microsoft Corporation. [. . . ] · The [Security] setting cannot be cancelled by using the [Reset] of the menu. 32 4. Convenient Features Using Remote Mouse Receiver (VT580/VT480 only) The remote mouse receiver enables you to operate your computer's mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. TIP: The mouse receiver is available as an option for VT58/VT48 Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer's USB port (type A). NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings. Computer Remote mouse receiver To USB port of PC or Macintosh When operating a computer via the remote mouse receiver 7m/22 feet 30° 30° Remote sensor on the remote mouse receiver When connecting using the USB terminal For PC, the mouse receiver can only be used with a Windows 98/Me/XP*, Windows 2000 or Mac OS X 10. 0. 0 or later operating system. * NOTE: In SP1 or older verison of Windows XP, if the mouse cursor will not move correctly, do the following: Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer Options tab]. NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may not identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals. 33 4. Convenient Features Operating your computer's mouse from the remote control You can operate your computer's mouse from the remote control. PAGE UP/DOWN Button: scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. SELECT Buttons: moves the mouse cursor on your computer. MOUSE L-CLICK Button: works as the mouse left button. MOUSE R-CLICK Button: works as the mouse right button. About Drag Mode: By pressing the MOUSE L-CLICK or R-CLICK button for 2 or 3 seconds then releasing, the drag mode is set and the drag operation can be performed simply by pressing the SELECT button. To drop the item, press the MOUSE L-CLICK (or R-CLICK) button. To cancel it, press the MOUSE R-CLICK (or L-CLICK) button. NOTE: When you operate the computer using the SELECT or button with the menu displayed, both the menu and the mouse pointer will be affected. Close the menu and perform the mouse operation. TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user documentation or online help supplied with your computer. 34 5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. Press the MENU button on the remote control or projector cabinet to display the Menu. OFF POWER MAGNIFY PIC-MUTE ON PAGE UP DOWN MENU ENTER EXIT 2. Press the SELECT or button on the remote control or the projector cabinet to highlight the menu for the item you want to adjust or set. OFF POWER MAGNIFY PIC-MUTE ON PAGE UP DOWN MENU ENTER EXIT 3. Press the SELECT button or the ENTER button on the remote control or the projector cabinet to select a submenu or item. OFF POWER MAGNIFY PIC-MUTE ON PAGE UP DOWN MENU ENTER EXIT 35 5. Use the SELECT or button on the remote control or the projector cabinet to select the item you want to adjust or set. Adjusting the level of a selected item or selecting an item. Changes are stored until you adjust it again. [. . . ] Service Options: There are 3 types of [Service] available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time. [. . . ]