User manual NEC XG1351

[. . . ] MultiSync XG75A MultiSync XG110LC MultiSync XG135LC Large Screen MultiSync Projection Monitor Operation Manual Model Number: XG-751/XG-1101/XG-1351 XG-751G/XG-1101G/XG-1351G For the customers in Germany CAUTION: To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. GSGV Acoustic Noise Information Ordinance: The sound pressure level is less than 70 dB(A) according to ISO 3744 or ISO 7779. 2 654321 654321 654321 654321 654321 654321 INTRODUCTION. Before operating this projector, please read this manual carefully and completely. This manual will provide you with the basic instructions for operation of the projector. [. . . ] Proceed as follows: 1 Press the OPERATE button. · The "OPERATE" menu is displayed. 2 Use the CURSOR or button to highlight the "2/POSITION" line and press ENTER to display the "POSITION" menu. You can also select the "POSITION" menu directly by pressing the INPUT "2" button. ­ OPERATE ­ 1 / PICTURE 2 3 4 5 6 7 8 / / / / / / / POSITION SOUND INPUT SELECT SOURCE INFO STATIC CLOSED CAPTION TIMER 3 Use the CURSOR or button to select either "SHIFT", "IMAGE SIZE", or "BLANKING" and then press ENTER. You can also select each item directly by pressing the INPUT "1" , "2" or "3" button. · The selected adjustment screen will be displayed. Items to select · SHIFT (Position of the picture) · IMAGE SIZE (Picture size) · BLANKING(Screen area) ­ POSITION ­ 1 / SHIFT 2 / IMAGE SIZE 3 / BLANKING POSITION ­ SHIFT ­ 4 Adjust the position, size, or screen area. When selecting SHIFT: Use the CURSOR buttons to move the position of the picture. · Pressing or moves the picture left or right. · Pressing or moves the picture up or down. To do so: While displaying the SHIFT screen, press and hold CTL and press any one of the CURSOR buttons to display the SHIFT FINE screen. Pressing or moves the picture left or right finely. Pressing or moves the picture up or down finely. To return to the SHIFT screen, press and hold CTL, then press any one of the CURSOR buttons. H V +10% ­90% POSITION ­ S H I F T FINE ­ H V +10% ­90% 21 BASIC OPERATION When selecting IMAGE SIZE: Use the CURSOR buttons to adjust the size of image. · Pressing or button increases or decreases the horizontal size. · Pressing or button increases or decreases the vertical size. POSITION ­ IMAGE SIZE ­ H V +10% ­90% When selecting BLANKING: 1) Hold down the CTL button and press CURSOR buttons to choose the right, left, top, or bottom edge. · The marker on the selected side will turn to a solid color. 2) Adjust the blanking using the CURSOR buttons. Pressing or increases the adjustment values. Pressing or decreases the adjustment values. Pressing or increases the adjustment values. Pressing or decreases the adjustment values. [. . . ] Complies with ISO 3744 or ISO 7779 rojection type . . . . . . . . . . . . . . . . . Refraction type Projector and screen are separated Projection system . . . . . . . . . . 3 lens and 3 CRTs in-line Scanning frequency . . . . . . . (XG-1351/XG-1351G) H 15 to 135 kHz/V 40 to 160Hz (XG-1101/XG-1101G) H 15 to 110 kHz/V 40 to 160Hz (XG-751/XG-751G) H 15 to 75 kHz/V 40 to 160Hz Retrace time . . . . . . . . . . . . . . . . . . [. . . ]