User manual NEFF S41M50N0GB

[. . . ] 9000 405 166 (8906) en Operating instructions n 7 8 9 10 Reset 3 sec. Start ABC 1 2 3 4 5 6 20 21 22 23 24 25 26 27 28 29 30 31 32 en Table of contents Washing the dishes . 16 16 16 16 16 16 16 16 17 17 17 17 18 18 18 18 19 19 20 20 20 20 21 21 22 23 23 23 23 24 24 24 24 24 25 25 25 25 25 Safety instructions . 7 Switching off water softening system . 8 Switching off rinse aid refill indicator . [. . . ] If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. End of programme The programme has ended when the value : is indicated on the numerical display )". Switching off the appliance Short time after the end of the programme: ­ Switch off ON/OFF switch (. ­ Turn off the tap (not applicable if AquaStop fitted). ­ Remove the utensils when they have cooled down. Switching on the appliance ­ Turn on the tap fully. The display of the last selected programme flashes. This programme remains selected if no other programme button 0 is pressed. The expected programme duration flashes on the digital display )". The programme starts running. ã=Warning Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display )". The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). At the end of the programme please open the door fully and not partially when emptying the dishwasher. Any escaping water vapour could damage sensitive worktops. 16 en Interrupting the programme ­ Switch off ON/OFF switch (. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. ­ To continue the programme, switch on the ON/OFF switch ( again. Intensive drying The final rinse uses a higher temperature which improves the drying result. (Caution if utensils are delicate!) ­ Close the door. ­ Hold down programme button # and press START button P until the digital display )" : . . . The LED for button # flashes and the digital display )" displays the factory setting : . ­ Press programme button # until the factory set value : is indicated on the digital display )". To change the setting, ­ Press the button 3 to switch the Intensive drying on : or off : . The set value is saved. Terminating the programme (Reset) ­ Press START button P for approx. The numerical display )" indicates : . ­ The programme sequence lasts approx. On the digital display )" is indicated : . [. . . ] (This prevents residual water from running into the machine control and damaging the programme sequence. ) Waste disposal Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials. Please dispose of the individual parts separated according to type. Please ask your dealer or inquire at your local authority about current means of disposal. Packaging All plastic parts of the appliance are identified with internationally standardised abbreviations (e. g. Therefore, plastic waste can be sorted out when the appliance is being disposed of. [. . . ]