User manual NEFF T55T83X2

[. . . ] 18 Elements that may damage the appliance . 26 Activating and deactivating the childproof lock . 29 Normal noise while the appliance is working. 31 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www. [. . . ] As two independent hotplates The front and back hotplates, each with two inductors, can be used independently by selecting the necessary power for each one. In this case, it is recommended to only use one pan on each hotplate. Advice on using cookware To ensure that the cookware is detected and heat is distributed evenly, correctly centre the cookware: As one hotplate Diameter less than or equal to 13 cm Place the cookware on one of the four positions shown in the image. Warnings When using cookware of a different size or made of a different material, noise and vibrations that do not affect the correct working of the zone may occur. To obtain maximum power with the Powerboost Function, place the cookware in the centre of the flexible zone when used as a single hotplate. On hobs with more than one flexible zone, it is not recommended to use several zones at the same time for a single pan. Diameter greater than 13 cm Place the cookware on one of the three positions shown in the image. If the cookware takes up more than one hotplate, place it at the top or bottom edge of the flexible zone. 25 Consisting of two independent zones The flexible zone can be used normally as two independent hotplates. How to activate See “adjusting the hotplate“ section. Changing the power level Select the flexible zone and change the power level using the Tipp control. To add more cookware Select the flexible zone and then press the ï symbol. The new pan will be detected and the previously selected power level will be maintained. Note: If the pan on the hotplate that is switched on is moved or removed, the hob will perform an automatic search and the previously selected power level will be maintained. To deactivate Select the zone and press the ï symbol twice. To deactivate the flexible zone, the ï symbol must be pressed twice within two seconds. Return to using two hotplates Select one of the two hotplates of the flexible zone and set to ‹. Note: When a hob is switched off and later switched on again, the flexible zone will again be used as two hotplates. As one hotplate To use the entire hotplate with all individual zones. How to activate The hob must be switched on. Position the pan and using the Tipp control symbol, select one of the two zones corresponding to the flexible zone. Note: The power level is displayed by one of the flexible zone indicators or both, depending on the location and size of the cookware. [. . . ] The fan may also work by inertia after the hob has been switched off, if the temperature detected is still too high. The noises described are normal, they are part of induction heating technology and not a sign of malfunction. After-sales service Our after-sales service is there for you if your appliance should need to be repaired. We are committed fo find the best solution also in order to avoid an unnecessary call-out. [. . . ]